| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | rockers cams |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=102214 |
102214, rockers cams
Posted by hybridrst, Dec-10-06 03:44 AM
My cams and rockers have some scaring on them and I have a slight ticking noise (I belive from that )in the head.Is this really bad or can I get away with not replacing them(crane cams and pt rockers so it would not be cheap to do)any help is appreciated
|
102215, RE: rockers cams
Posted by cc8balla, Dec-10-06 03:57 AM
Originally posted by hybridrst
My cams and rockers have some scaring on them and I have a slight ticking noise (I belive from that )in the head.Is this really bad or can I get away with not replacing them(crane cams and pt rockers so it would not be cheap to do)any help is appreciated
You should be ok. Make sure the cam caps aren't scored though. The insides, where the cam rides.
|
102216, RE: rockers cams
Posted by bullettdsm, Dec-10-06 10:47 AM
A little scoring is normal for used cams. BUT without looking at it, I can't say for sure. If you post up a couple of pics that would help us immensely.
MB
|
102286, RE: rockers cams
Posted by techboy, Dec-15-06 03:53 AM
I would try just replacing the rockers. The cams will have some scarring in them over time. I've always been taught that if you can catch your finger nail on them you have a problem.
|