Go back to previous topic
Forum namePerformance/Engine
Topic subjectQuestion for people that modified the stock 95 FPR
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=100484
100484, Question for people that modified the stock 95 FPR
Posted by mike_d, Aug-17-06 10:28 AM
So I followed Corbin's How-To on modifying the 95 FPR (http://www.2gnt.com/www/corbin/fpr.html) and when I put it back in the rail and put the snap ring back on it is way too loose. I'm almost positive it will leak if I put it back in like this. Anyone else ever have this problem?
100491, RE: Question for people that modified the stock 95 FPR
Posted by mike_d, Aug-17-06 07:02 PM
Anyone?
100495, RE: Question for people that modified the stock 95 FPR
Posted by cougar694u, Aug-18-06 04:25 AM


On that image above, the big black line to the left of 'saw here' is an o-ring. Replace that o-ring and you should be good.

My FPR allowed the gas to flow right past it. Changed the o-ring and no more problems. I bought the assortment of o-rings from the help section at AZ and found one that fit. It was really snug when putting it back together, but that's a good thing.