I drew up the wiring diagram in the Wiki assuming that you would have the reverse sensor in your hand with the connector facing you. If you prefer to double check that with wire color to wire color, I can probably help. On a 1995, pin 1 on the reverse sensor plug is red/blue stripe. Pin 2 is black/white stripe. So, take the red wire (may have blue dashes) from the park/neutral switch and connect it to the red/blue stripe wire from the reverse sensor plug. Then, take the black/white stripe wire from the park/neutral switch and connect it to the black/white stripe wire from the reverse sensor plug. If your reverse lights turn on when the ignition switch is ON and transmission is in reverse, you are good to go.


Corbin
'95 ESI-T

Now with more power and fewer leaks



Humble servant of the Wiki