i cant find anyone that sells the caged output shaft bearing (yes, the crappy one with the plastic housing that breaks) for the 420a motor NV-T350 trans, i pulled my motor because i was having a nasty griding coming from the bell housing, pulled the trans apart and found nothing then pulled my clutch off and the flex plate was broke in the middle (converted to a non modular clutch setup, thanks to bulletdsm's how-to at 2gnt) anyways was putting everything together and the cage broke on the output shaft bearing, luckly i found all the needle bearings but now i cant find that part....i have called mitsubishi and ordered part after part and they can't get it right, ive looked online and nothing, i would love to put a bearing with an upgraded metal cage but if i cant find one then ill just put the crappy design one on..help me out fellow dsmers got to get my ride back on the road

www.chryslerpartsdirect.com

http://www.trademotion.com/shoppingcart/index.cfm?action=addItem&return=accessory&siteid=213764&partid=2035994&make=7&partname=BRG%20PKG%20OUTPUT%20SHAFT&catalogid=3

^ that link should add it to your 'cart'. part number 4761093.

about $40 plus a small ship fee.

you should receive the roller bearings en-caged and a new output shaft bearing race (pictured below). Look at this page if you need any other additional part numbers: http://www.2gnt.com/?d=LSD_and_Diff_related_parts

Thanks so much man.

^^What mikey said.

Please use proper capitalization and punctuation. It really annoys us to have to read giant run-on sentences.