i know that a 2001+ sohc neon 3.55 trans is preferd b/c its hydrolic, and a 95~96 neon soch 3.55 trans has a cable but i found a good deal on a 96 sohc trans:

(3.55) w/PG limited slip differential w/Diff pin welded $300

is the welded diff pin a good option to have?
and since it has a cable instead of hydrolic, can i change it to hydrolic or waht would i have to do to make this fit in my 420a 5spd?

i need to swap bell hosuings and speed sensor, what else? thank you

Read the writeup on the Wiki page to explain what you need to do.


The diff pin welded is just an option between that and safeing brackets.


Terry

ok, i was reading the PG lsd is good if its isntalled correctly with those brackes or how ever just as long as the pin dosent fal into the spider gears is that corect?? do you think ill have a prob with thre PG in the 300~350 range?

ok i was readin the write up it says i need to remove the diff pin from the 3.55, and i stopped there, so im assumin i swich the diff pin from my trans to the 3.55, well if the one thats in the 3.55 is welded then i prety much am screwd correct?

upon reading it afin, it says my diff needs to come out, so if the pin is welded on to the PD LSD, can i still remove the LSD/diff from the 3.55?