| Go back to previous topic |
| Forum name | Manual Trans - NV-T350 |
| Topic subject | Bellhousing bolts diagram |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i34&topic_id=5718 |
5718, Bellhousing bolts diagram
Posted by pirotlord, Sep-08-06 05:43 AM
Does anyone have an image or diagram of the bellhousing meeting up to the engine?
My eclipse has been down for about 6 months and I am finaly getting arround to fixing it but I can't remeber which bolts go where :(
Chilton is no help either.
|
5719, RE: Bellhousing bolts diagram
Posted by DarkOne, Sep-08-06 06:08 AM
All the black coarse thread M12's go between the block and trans. The ones with the tapered tip go from the block side (near the starter and on the back of the block) into the threaded holes in the bellhousing. The flat tipped bolts go from the trans side at the top (under the cam sensor and under the heater hoses) into the block.
Then there's the 8 crank -> flexplate bolts, and the 4 flexplate -> clutch bolts. All of those are short (i think) M10 bolts with 18mm heads.
|