Go back to previous topic |
Forum name | Manual Trans - NV-T350 |
Topic subject | Worn Clutch? |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=5268 |
5268, Worn Clutch? Posted by Red97Mitsu, Dec-31-69 06:00 PM
As our stock hydraulic clutch wears does the pedal move in or out. Would this be one of the first signs that the clutch is going bad.
Thanks
|
5288, RE: Worn Clutch? Posted by Star Turbo Talon, Dec-31-69 06:00 PM
The rollover point will get higher. This is because the thinner the disk gets the farther the pressure plate must move to clamp the disk. The farther the pressure plate moves, the farther the release fingers point outward towards the throw out bearing.
Now if your hydraulic setup is wearing then your clutch pedal wounld need to pushed farther to depress the clutch. This is due to leaks or air in the system.
Terry
|
5297, RE: Worn Clutch? Posted by andy_sbclutch, Dec-31-69 06:00 PM
The clutch pedal should move up as the clutch wears
|