| Go back to previous topic |
| Forum name | Manual Trans - NV-T350 |
| Topic subject | Clutch Master problem |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=5122 |
5122, Clutch Master problem
Posted by 97esiboosted, Dec-31-69 06:00 PM
I just put on a clutch master's fx300 and have 400 miles on it and i've had clutch chater senst i put it on. will this go away with use or should i try to get a new one?
|
5123, RE: Clutch Master problem
Posted by DarkOne, Dec-31-69 06:00 PM
Chatter is normal on a performance ceramic-faced clutch. Get used to it.
|
5124, RE: Clutch Master problem
Posted by 97esiboosted, Dec-31-69 06:00 PM
Thanks
|
5152, RE: Clutch Master problem
Posted by 95greenhrcgs, Dec-31-69 06:00 PM
It will always chatter. I have noticed that after some miles are put on it, the chatter seems to decrease a little. That, and you will get used to driving it, and can pretty much drive it smoothly.
|
5171, RE: Clutch Master problem
Posted by 97esiboosted, Dec-31-69 06:00 PM
I have gotten about 1400 miles on it and it is starting to engage smoother. Thanks for the info.
|
5202, RE: Clutch Master problem
Posted by andy_sbclutch, Dec-31-69 06:00 PM
Originally posted by 97esiboosted
I have gotten about 1400 miles on it and it is starting to engage smoother. Thanks for the info.
Clutches don't have to chatter. If your car is built to drive on the street, use a full face clutch. A puck style clutch is prone to chatter because there is no cushion between the facings. And you don't sacrifice any torque with a full face clutch disc. Check out the product information page at www.dxdracingclutches.com
|