Ok.... can someone list what parts are needed to swap the neon tranny in?

2001-2004 Neon MTX Tranny (non srt4)
Cables?
Mount?
What clutch/flywheel do we use (stock 2gnt/newer neon)?
Which sensor?
Anything else?





^pretty much stock now...^ New toy: 02 Aspen White WRX

Originally posted by thegame
Ok.... can someone list what parts are needed to swap the neon tranny in? 2001-2004 Neon MTX Tranny (non srt4) Cables? Mount? What clutch/flywheel do we use (stock 2gnt/newer neon)? Which sensor? Anything else? ^pretty much stock now...^ New toy: 02 Aspen White WRX

Put the neon gearbox on your bellhousing. ;) Then hook everything back up and you've done the swap.

...wanna take my "point-ginity"? Someone needs to. Vote...

Not if you have an 01 or newer trans. Chk your trans, the 01 had a hydraulic clutch I am pretty sure so there is no bellhousing swap. Just install it and enjoy.

Terry

So I dont need to switch the bellhousing, tranny mount, and cables for the 01+ neon trans? I need a clear answer.



^pretty much stock now...^ New toy: 02 Aspen White WRX

Originally posted by thegame
So I dont need to switch the bellhousing, tranny mount, and cables for the 01+ neon trans? I need a clear answer. ^pretty much stock now...^ New toy: 02 Aspen White WRX

IF you want a clear answer, get off your ass and do some research. Lean to search and read.

http://www.2gnt.com/nuke/modules.php?name=FAQ&myfaq=yes&id_cat=6&categories=Manual+Tranny#33

Just bolt the trans in.

I have been trying to research. But after reading these...

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=3855&mesg_id=3855&listing_type=search
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=3164&mesg_id=3164&listing_type=search ...its quite confusing as to what I do and dont really need.

This one says just swap bellhousings and speed sensor and be done with it...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=2835&mesg_id=2835&listing_type=search

So theres a bunch of different answers. Dont tell me I need to search. I did. That is why Im looking for a clear answer.



^pretty much stock now...^ New toy: 02 Aspen White WRX

You do need to search and take a look at the trans you have. Takea look at the damn bellhousing. the 01 neon trans has a hydraulic setup just liek the link i posted. Are you telling me you doubt the comprehensive specs on the trans? Do what you want you obviously dont listen.

Terry

Originally posted by thegame
I have been trying to research. But after reading these... http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=3855&mesg_id=3855&listing_type=search http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=3164&mesg_id=3164&listing_type=search ...its quite confusing as to what I do and dont really need. This one says just swap bellhousings and speed sensor and be done with it... http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=2835&mesg_id=2835&listing_type=search So theres a bunch of different answers. Dont tell me I need to search. I did. That is why Im looking for a clear answer. ^pretty much stock now...^ New toy: 02 Aspen White WRX

Okay. In the second link, i'm quoted as saying...

Originally posted by Dino
Yes, the 2002 will bolt right up, the 2G Neons use a T350 with a hydralic clutch setup just like we do. Might still need to use the 2GNT shift select levers.

Which says that it'll bolt right up, and you'll use the 2gnt shift select levers. (the arms on the outside of the trans).

James had to swap the 3.55 ring gear to his diff because he had a PG LSD in it. You won't have to do that.

It's really that easy.