Im doing a manual conversion and have all the parts and they are used and all the parts have 60,000 miles on them. So i was wonderig if i should replace any of the parts with new ones?If so what parts should i get that are new?

If i was u i would atleast get some safeing brackets for ur differential pin. I also decided to get a phantom grip limited slip conversion for around 250. There is also a newschool one u can get for 150 but either should be good.

how much are the safening brackets for the diff pin?Also should i get new clutch fluid line and the line from the master to the slave?

u should beable to get the safing brakets at the dealership for 9 bucks and the lines here is a link to some http://www.extrememotorsports.com/g2cat/clutch.htm

I have called 3 different dealerships and they dont know and havent heard of a bracket for the diff pin.Also can you just weld the differential pic on?

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=223&mesg_id=223&listing_type=search

There is more info about the safing brakets in the link above:thumbsup