Go back to previous topic |
Forum name | Manual Trans - NV-T350 |
Topic subject | $500.00 is too much for clutch install |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=4062 |
4062, $500.00 is too much for clutch install Posted by baxsom, Dec-31-69 06:00 PM
i just got quoted 500 bucks to install a clutch into my gs. that seems a little high to me but its the same shop that built the car so i know that they know the car inside and out but still
i have found some written tech guides on how to do this but is there one somewhere that has pics as well this is the biggest undertaking i have attempted with the car sp i am a little apprehensive
my father in law has a hydrolic lift and multiple floor jacks so moving the car around wont be a problem plus i have the haynes manual
is it worth the undertaking or should someone who has never done this install before not even touch it
|
4065, RE: $500.00 is too much for clutch install Posted by Blizare, Dec-31-69 06:00 PM
Do it yourself
imo
|
4084, RE: $500.00 is too much for clutch install Posted by willmayo, Dec-31-69 06:00 PM
yeah definitly do it yourself. if you know how to turn a wrench, you can get through it. its not exactly the easiest thing to do, but its not really too big of a deal. once you learn how to do it, next time you have to take out the trans it'll be a 2 hour job. if that.
|
4092, RE: $500.00 is too much for clutch install Posted by DarkOne, Dec-31-69 06:00 PM
Yeah, it's easy.
|
4093, RE: $500.00 is too much for clutch install Posted by baxsom, Dec-31-69 06:00 PM
I have the chiltons manual are there any others such as haynes that are a better guide for this project
i am guessing that a new rear mainseal is in order as well any other gaskets i should worry about while i am in there
|
4094, RE: $500.00 is too much for clutch install Posted by ryansiefring, Dec-31-69 06:00 PM
do you guys resurface the flywheel when you install a new clutch?
|
4097, RE: $500.00 is too much for clutch install Posted by baxsom, Dec-31-69 06:00 PM
no spec clutches come with a new flywheel
|
7719, RE: $500.00 is too much for clutch install Posted by 96mitseclipsers, Dec-31-69 06:00 PM
yes for no hot spots in the flywheel
|
7720, RE: $500.00 is too much for clutch install Posted by bullettdsm, Dec-31-69 06:00 PM
First off, unless someone already played with your clutch, you have a modular clutch. Its basically the clutch pressure plate, clutch disc, and flywheel all riveted together. This may help you understand the difference;
http://www.2gnt.com/index.php?d=Non%20Modular%20VS%20Modular%20Clutch
I recently did a write up in the wiki on pulling a transmission (I didn't have time to do the write up on installation).
http://www.2gnt.com/index.php?d=Removing%20your%20transmission
Now this is the drop down version. some like to lift it up out of the car, or even take out the engine and tranny together. But this wiil give you an idea of what it will take.
Don't forget to browse the Wiki when looking for answers, ;-)
Good luck with the clutch job.
|
7721, RE: $500.00 is too much for clutch install Posted by klynt96rst, Dec-31-69 06:00 PM
like everyone else said, install it yourself, its not very hard, can be a little a time consuming if its your first time thats about it
|