after going off in first, and then slamming into second. i let off the gas, and the car is being stupid. and this is what happened.

btw: these are driveshaftshop stage 3 axles.

If your motor mounts are good (you don't get wheel hop when spinning the tires). Than you just got a poor build. How much torque is your car putting out? You might need even a stronger axle.

i would swear poor casting.....that should not happen. I would expect the splines to break first if we were to point toward wheel hop. That roller takes abuse no matter what..just the nature of the beast.


Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

Yeah, looks like you found the weak spot.
I hate it when $#!t breaks when you're trying to have fun.
My rear motor mount brace broke when I ignorantly dropped the clutch all night at the track.
On the bright side, it gave me a reason to put in the motor mount inserts that have been sitting in my closet for months.