http://www.2gnt.com/nuke/modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=6&categories=Manual+Tranny

Feel free to make suggestions for additions in the form of:

Question: This...

Answer: That...

Thank you :-) You'll be given credit for your Q&A in the FAQ if it makes it.

how bout what kinda LSD upgrades are available for our trannies?

Quaife -replacement clutch type LSD, lifetime warranty (they dare you to break it)- $$$$
Phantom Grip- Adds to your existing differential, works by pushing on your spyder gears creating a LSD effect- $$
NSR Slip in Diff- Same as phantom grip with slightly different construction- $

that's all the LSDs I can think of

and how bout my question what do I torque those bellhousing bolts at its not in my chilton's :(

or what kinda sealant do you use to seal tranny?
Loctite Red 518 or equivalent anaerobic sealant

you can put stuff about modular/non modular clutches too, damn goofy clutches :P

some stuff like that?

how about maintenance issues. they tend to be most frequent frequently asked question:

AKA

Q: what fluid should I put in my tranny?
A: mopar (or mitsubishi) NVT-350 fluid ONLY. other fluids have been shown to ruin the syncros in a short amount of time

Q: How do I change the fluid?
A:http://www.ghettoraid.net/faq/guide.htm

I've use BG syncro shift for like 40k miles :thumbsup

but then again I've heard you should use the factory stuff.

Cool guys. Keep 'em comin. :-)

If I can track down or if someone else has handy the Mopar Performance part number for the bolt replacements that safe the differential pin.

I also have had BG Syncroshift in for 15k to 20k, not sure what I'll put in when I change it out next though.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

Cool.. you can add that yourself. I'll PM you how.

Q: what kind of fluid should I use? What are diff pin safing brackets?

A: Only use mopar mtx fluid, part number 4874465. You will need 2 quarts. Diff pin safing brackets are a fix chrysler came out with to hold the diff pin inside the diff. they are only a few bucks so if you ever have your trans open install them. You need 2 of them per diff, part number 04800059AA.

Question : Was the FAQ spell checked?
Answer: Nope!

Heh, couldn't resist.

you don't need to spell check these days. the cambridge study found out it is useless. ;)

I just updated and added some of this info, let me know if there is anything else you can think of, or if what I typed doesn't make any sense.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

Thq quaife is an ATB, not a clutch type. Might wanna fix that :-)

Done, and a :P to Hades



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm