| Go back to previous topic |
| Forum name | Manual Trans - NV-T350 |
| Topic subject | Converting from cable to hydraulic |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i34&topic_id=3040 |
3040, Converting from cable to hydraulic
Posted by TalonSpeed, Jun-23-04 10:53 PM
Since a neon transmission is alot cheaper than a 2gnt transmission, I have decided to get a neon tranny. The problem is how am I going to convert the cable tranny to a hydrualic clutch setup.
I took off my hydro clutch fork. All it does is pivot on a ball, which can be removed. So can i just swap the forks over and use the hole tranny (bellhousing and transaxle) from a neon???
|
3041, RE: Converting from cable to hydraulic
Posted by JasonESi_T, Jun-24-04 04:40 AM
Use the bellhousing from your 2GNT on the neon tranny case. That's it.
|
3043, RE: Converting from cable to hydraulic
Posted by TalonSpeed, Jun-24-04 10:40 AM
Originally posted by JasonESi_T
Use the bellhousing from your 2GNT on the neon tranny case. That's it.
I know that is the easiest thing to do, but my bellhousing has a hole in it.
|
3046, RE: Converting from cable to hydraulic
Posted by DarkOne, Jun-24-04 01:06 PM
Butcher a Neon for the parts you need, then. Don't know what to tell you otherwise, besides hydralic > cable.
|
3050, RE: Converting from cable to hydraulic
Posted by TalonSpeed, Jun-25-04 06:53 AM
This is the exact same thing that happen to my car:
http://www.neons.org/forums/viewtopic.php?p=1233307#1233307
The NV-T350 differential doesnt like slip in lsd obviously.
|
3059, RE: Converting from cable to hydraulic
Posted by Star Turbo Talon, Jun-26-04 01:45 PM
with the Neon bellhousing you wont have a place to mount the slave cylinder to. Good idea but wont work.
Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges
97 Eclipse
Greddy header/evo exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks
Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)
|
3078, RE: Converting from cable to hydraulic
Posted by TalonSpeed, Jun-28-04 08:17 AM
after looking at the neon bellhousing closely, i came to the conclusion that it would take some drillin and ghetto rigging for it to work. The forks are very similar though.
Does the 2ng gen neon tranny drop right in, since it is hydraulic???
|
3080, RE: Converting from cable to hydraulic
Posted by DarkOne, Jun-28-04 06:56 PM
Originally posted by TalonSpeed
Does the 2ng gen neon tranny drop right in, since it is hydraulic???
Yes, though some of the gear ratios are different depending on model. See the MTX FAQ on the main site. http://www.2gnt.com/nuke/modules.php?name=FAQ&myfaq=yes&id_cat=6&categories=Manual+Tranny#33
|
3083, RE: Converting from cable to hydraulic
Posted by TalonSpeed, Jun-28-04 10:31 PM
that link says this:
What Neon transmissions will work with the 2GNT?
None of them, with the Neon bellhousing. You have to put your 2GNT bellhousing on the Neon trans. Internally the Neon DOHC transmissions are identical to the 2GNT transmission.
AND ALSO SAYS THIS:
the 2001+ transmissions use the same hydraulic slave cylinder that our cars do, and only require replacign the shift arms and mounting brackets.
|