| Go back to previous topic |
| Forum name | Manual Trans - NV-T350 |
| Topic subject | Welding Diff. Pin? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i34&topic_id=2996 |
2996, Welding Diff. Pin?
Posted by dougie2, Jun-17-04 04:49 AM
I don't know much about trannies. Does anyone have a write-up or a pic of where I need to weld it?
|
3000, RE: Welding Diff. Pin?
Posted by DarkOne, Jun-17-04 07:16 AM
If you look at the diff, it's as obvious as it can possibly be. Look for the big steel shaft that goes through the carrier.
|
3003, RE: Welding Diff. Pin?
Posted by dougie2, Jun-17-04 12:11 PM
I figured... I'll pull it this weekend and check it out. Thanks.
|
3044, RE: Welding Diff. Pin?
Posted by nosdeclipse, Jun-24-04 11:56 AM
is welding it better than the safing brackets i have read about? i am going to be using a phantom grip lsd if that makes a difference.
|
3052, RE: Welding Diff. Pin?
Posted by Sorry_i_Win, Jun-25-04 01:05 PM
I too am going to be rebuilding my tranny and using an LSD insert. I'm curious about this as well.
|
3053, RE: Welding Diff. Pin?
Posted by 420AYE, Jun-26-04 04:57 AM
a welded diff WITH a pg would be pointless as far as my knowledge serves. and safing brackes supposedly keep the pin in there. welding the diff shut would work too i guess. but i don't think ya wanna weld it and then install a pg... *shrug*
|
3065, RE: Welding Diff. Pin?
Posted by dougie2, Jun-27-04 03:30 AM
The questions was about welding the pin in place instead of using the brackets. Either method will work fine.
You definitely DO NOT want to weld the diff.
|
3066, RE: Welding Diff. Pin?
Posted by 420AYE, Jun-27-04 06:20 AM
ah hehe. ok. i misunderstood.
|