Like it says, I got all the MT stuff in but I need 2 more clips. So can I pick these up at pep boys? Or is it a dealer only part?

Originally posted by Chamuko
Like it says, I got all the MT stuff in but I need 2 more clips. So can I pick these up at pep boys? Or is it a dealer only part?

Probably dealer only. Mitsu part # MB367526 , you need two.

You got the ones that are inside too right?

dealer part


New/More Mods Comming... New 1/4 Times In March/April

Are you talking about the clip that holds the linkage to the shift arms on the trans or the shift cables in the bracket. both clips i have bought at parts stores. I just take in one that i have and match it up.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

What stores? I already tried pepboys and kragen.

I matched mine up at a local pepboys.

Terry

96 Eagle talon ESI
rear disk conversion - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

97 Eclipse
Greddy header/evo exhaust - Shortened shifter - Tokico Adj wrapped with H&R - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, stage 2 MIBA clutch, 450 Turbo injectors, Adj Fuel reg/return line, GSX Front brakes (need rotors)

In the HELP section? Damn maybe I should go to some others...

Well not exactly in the help section but where all the bolts and drawers are for the various clips ect. The cable to shift arm is just a very small cotter pin. the clip for the cable to bracket is a clip that has been used for over 30 yrs in all cars. If you go ask for the cable to bracket clip they will have no idea what you are looking for thats why you need to take one in and match it up.

Terry
96 Eagle talon ESI
rear disk conversion - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

97 Eclipse
Greddy header/evo exhaust - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Tokico Adj wrapped with H&R - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 450 Turbo injectors, SFMU/return line, GSX Front brakes (need rotors)