| Go back to previous topic | | Forum name | Manual Trans - NV-T350 | | Topic subject | clutch promblem | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i34&topic_id=1230 |
1230, clutch promblem Posted by 98talonNT, Aug-16-03 11:50 AM
when i put my clutch in i get a rubbing/squeaking noise, and it reoccurs when i let off the clutch. any ideas on this one guys?
|
1231, RE: clutch promblem Posted by NinjaDaPango, Aug-17-03 04:39 PM
>when i put my clutch in i get a rubbing/squeaking noise, and >it reoccurs when i let off the clutch. any ideas on this one >guys? >
there is no problem if it just squeeks and the clutch grabs I would suggest you let the clutch out faster because it sounds like you are riding the clutch if you can feel it slip when you change gears then it might have oil or somthing on it or it could need replacing it would need to be replaced if oil was on it and some seals fixed on it as well I say take it to a tranny shop and have them check it that would be your best bet. do that asap.
|
1232, RE: clutch promblem Posted by DarkOne, Aug-17-03 04:43 PM
If you're gettign a sqeek or a graon when you're movign the clutch pedal backa nd forth, it's probably just the master or slave cylinder. make sure it's not leaking and relace it/them if it/they are.
|
1246, RE: clutch promblem Posted by XtremeRS, Aug-18-03 01:31 PM
You know what, i'm not sure if its the same noise i'm getting, but this is my prob: In first gear, when i am letting up on the clutch to move the car, at that certain friction point, right before full engagement, still slipping, i get a terrible squak/squeel noise. I def have a clutch issue, and i'm positive its coming from it. Did you have any new clutch work done? Is your noise only at a slipping friction point? Mine donest make noise any other time though....Its time once again, to pull this F'n tranny out :( Damn, this will make like 4 times now in several months..
|
1335, RE: clutch promblem Posted by nullforce, Sep-02-03 07:26 PM
I was getting a similar noise after replacing my stock clutch. I'd forgotten to put the center piece from the old flywheel onto the new one.
| |