i was just wantin to know how much it will cost (for labor) to get the final drive mod and shift kit put in a tranny?




<--Eclipse Racer-->

ANYONE??? PLEASE HELP THIS n00b




<--Eclipse Racer-->

M/T or A/T?

auto




<--Eclipse Racer-->

It shouldn't be more than $100.00 labor. I was able to do mine in 45 mins, but I knew what I was doing, and had all of the tools ready. if you know anything about cars this thing is doable by yourself. IMHO

if it was a c4 outta a mustang i could do it...i really havnt been on the import scene that long...


<--Eclipse Racer-->

IMO, the final drive mod is not really a thing. a lot of people think that they are cracking into their tranny to do this (I guess technically you are), but the final drive for the A604 is in a compartment on the drivers side of the trans. totally seperated from the internal workings. you only even lose about a quart of fluid doing it.
so if you have a reasonable set of tools (those sockets and steering wheel puller could offset the cost of labor to do this) and the ability to turn a wrench, I would suggest that YOU give it a try yourself. just read up on the write-ups.

and remember, we are here to walk you through if need be. just ask.

as far as the shift kit goes. I have had the valve body out before, and it is really simple compared to our turbo brother's transmissions. maybe not for the faint of heart though. it is true that if you get one done at a shop, you may as well get both done.


btw. when I posted $100, that was only for the final drive mod (not for the shift kit). I remember a few guys saying that that was what they paid,

thanks alot...do u know anyone that had the shift kit put in at a shop??? so that i could see about how much i'll be spending or saving....




<--Eclipse Racer-->

that one really depends. I think that a couple hundred dollars, at the right shop might get it done for you, but keep in mind, that one varys by a lot. some shops will work you over the coals for the work, while some really don't find it to be that big of a deal.

make some calls. if you get a shop that says "a what?" or "why would you want to do that" or the worst "you ought to sell that thing and get an american made car", try someone else. this kind of an install is really quite common for reputable shops. they should be able to tell YOU what is entailed in the service.

thanks alot wikki




<--Eclipse Racer-->