Does anyone have a pic of the plug needed for the swap. I read that there is a plug that the autos dont have that you need for the swap. I searched but couldnot find any info except for just "wire in the mtx plug". If noones has a pic could someone tell me the wire colors so I can pull it from the junk yard. Thanks and points to who ever can help me with this before tomorrow.
-Todd

you need the speed sensor plug and the reverse sensor plug

Are they attached to the vehicle wiring harness? If so do you know what color the wires are the the 2 plugs?
-Todd

thye are attached to a manula trans car but not an auto car if thats what your asking. I am not sure what wire colors they are off the top of my head. Check the repair manual.

Terry

Its in my write up.

I really should finish it and put it on the wikki

http://www34.brinkster.com/chamukogs/ATtoMT%20with%20pictures%20in%20document_files/reverse.bmp

http://www34.brinkster.com/chamukogs/ATtoMT%20with%20pictures%20in%20document_files/vss.bmp

Originally posted by Chamuko
Its in my write up. I really should finish it and put it on the wikki http://www34.brinkster.com/chamukogs/ATtoMT%20with%20pictures%20in%20document_files/reverse.bmp http://www34.brinkster.com/chamukogs/ATtoMT%20with%20pictures%20in%20document_files/vss.bmp

Those were the same color codes that I ended up getting. Thanks, and points to both of you.
-Todd

Good question, I was wondering the same.