Okay, i just recently dropped a 98 motor and tranny into a 95 Eclipse.

OBD2 --> OBD1


Everything is hooked up except for the following.

I goto start the car and I get nothing. not even a turn over.

The battery has plenty of juice.


Okay, Asfar as the motor goes, all the sensors have been swapped and are now hooked up to the 95 harness.


But I have a problem with the trany.

There is one rather large plug that does not come on the 95 harness.

Here it is: remember, (this is a 98 tranny)



Its the 2nd biggest plug on the tranny.

Here are the 2 plugs left overon the 95 harness:






what are my options?

i was thinking mabey i can get that plug from a OBD2 harness and rewire the 95 harness using that OBD2 plug.

But I'm not sire what sensors I'm fucking with.


can you tranny experts help me out please before I pull my hair out and burn the fucking car to the ground.

thank you

PS: Here are some pics and details from the swap:


http://www.southfloridaracing.com/forums/showthread.php?t=27633




-DegreE

bump

please, can anybodu help me?

yeah I believe you just need the plug from the 98 harness and need to splice it together.
I dont have the pinouts on hand though, they should be floating around in the electrical schematics or the tranny schematics on darkones big pdf file

yeah, i did so



and i got it working now. Funny how I still have 2 wires left on the new plug. ohwell, it drives and shifts fine.


I added more pics to my thread in www.southfloridaracing.com


thanks

Originally posted by DegreE
yeah, i did so and i got it working now. Funny how I still have 2 wires left on the new plug. ohwell, it drives and shifts fine. I added more pics to my thread in www.southfloridaracing.com thanks

HOOOWWW please explain dude i have the exact same setup. send me a pic of your wiring pleaseeee!! thanks man it will be much appreciated