ok this is the ghetto way but it works very well!

1: remove your trans cooler lines
2: place 2 5gal paint bucket infront of the vehical
3: extend cooler lines approx 3 ft ea.
4: get a buddy to help u out
5: drink a beer and have a smoke
6: drop the output trans cooler line into the bucket
7: drop the input trans cooler line into the other bucket
8: fill the *input* bucket with trans fluid
9: start the vehical and put the trans in 1st (make sure its on jackstands
10: remove the input line from the bucket when bucket looses approx 3qrts of fluid
11: keep the car running fuckers!in 1st!
12: kick back till the output trans line starts sputtering
13: turn off vehical
14: start cussing while your cleaning up the mess
15: smoke and have another beer
16: reinstall trans cooler lines
17: fill trans w/ appropiate amount of fluid
18: run vehical threw all gears (in 1 spot)
19: top off fluid
20: your done drink more

02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?

don't hate me please but, change filter before or after flush?

after is probably best. well now thinking about it I cant decide, either way IMO

after

02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?

So just to clarify...

At setp 12, it's okay to let the tranny starve of oil for a few seconds? Aren't you depriving it of oil by letting the thing sputter?

NO AS SOON AS U NOTICE A SPUTTER... TURN THE CAR OFF


02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?

Originally posted by InFiNiT3
8: fill the *input* bucket with trans fluid

Why is it necessary to fill w/ fluid for this step?

by filling with new fluid on the input side you will be forcing out bad fluid in which would normally durring a drain and fill would stay inside the trans.



mods include but not limited to:
engine: AEM cai , pp head / TB / intake runners, Chikira 4-2-1 header , custom 2.5" exhast / pacesetter high flow cat/flowmaster2 muff,1mm over sized SS valves,PT valvetrain, AEM cam gears/pully set, prothane motormounts,440 injectors , ground kit.
Trans: Custom ATX (1 of a kind) poly-graphite steels , kevlar clutches , final drive , shift kit,3500 stall TC, Tourqe Wonder trans chip ($120.00 2gnt price only!!email for order info)

Don't forget to flush out the transmission cooler lines on the radiator with compressed air or clean fluid.

Also, replacing the filter requires removal of the fluid pan, so it would be better to replace the filter before flushing the transmission. That way you don't waste all that nice clean expensive fluid when you open the pan. True you will be getting some dirty fluid on a clean filter, but since the filter lasts 60k miles or so, and the fluid in the trans has already been through the old filter a million times, that shouldn't be much of an issue.

good point dan! long time no hear from :)




mods include but not limited to:
engine: AEM cai , pp head / TB / intake runners, Chikira 4-2-1 header , custom 2.5" exhast / pacesetter high flow cat/flowmaster2 muff,1mm over sized SS valves,PT valvetrain, AEM cam gears/pully set, prothane motormounts,440 injectors , ground kit.
Trans: Custom ATX (1 of a kind) poly-graphite steels , kevlar clutches , final drive , shift kit,3500 stall TC, Tourqe Wonder trans chip ($120.00 2gnt price only!!email for order info)