Go back to previous topic
Forum nameAuto Trans- A604
Topic subjecttranny fluid pan will not stop leaking??
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i33&topic_id=3663
3663, tranny fluid pan will not stop leaking??
Posted by 97grnRS, May-25-05 10:30 AM
my dads talon is an auto trans. i recently re built the motor and now the tranny oil pan will not stop leaking from the side closest to the block. it looks like its coming from around 2 of the bolts near the top of them.. we had this prob when he first got the car and i used silicone and a new gasket and it sealed. but ive tried 3 times in the past 2 days with new gaskets and the best silicones i can find for that purpose and it jsut will not seal. it still has a small stream of fluid leaking from the same spot.. what can i do? ?
3666, RE: tranny fluid pan will not stop leaking??
Posted by soulcontroller, May-25-05 11:54 AM
do you have the re-useable tranny pan gasket? i use that and it fixed any and all of my trans leaks.

if the bolt threads are stripped, try re-tapping them so you can torque them down. i dont remember the number, but check your srvc. manual.
3667, RE: tranny fluid pan will not stop leaking??
Posted by bones42099, May-25-05 07:52 PM
Originally posted by soulcontroller
if the bolt threads are stripped, try re-tapping them so you can torque them down.


that is what i was thinking to is that there isn't a real good seal around those two bolts. try retapping them and see how that goes.
3668, RE: tranny fluid pan will not stop leaking??
Posted by Corbin, May-26-05 06:53 AM
Or maybe you have a slight bend or ding in the pan. Or maybe a scrape on the transmission sealing surface. My craptacular Fram cork gasket seals without any RTV, so I don't think the gasket is the problem.

Corbin

'95 ESI-T
Now with more power and fewer leaks



Gimme fuel...Gimme fire...Gimme that which I desire
3670, RE: tranny fluid pan will not stop leaking??
Posted by InFiNiT3, May-26-05 12:10 PM
ITS 8LBS OF TRQ.....they strip real ez... the re-tread kit is about 20$ w/ drill bit


02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?