This fluid okay? :

http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=VLV&MfrPartNumber=333&CategoryCode=3291C

ATF+3 (for Chrysler vehicles)

the main question is how much would I need? Planning on bringing it to Jiffy Lube for tranny flush and definetly wouldnt want to use their Dexron crap. Thanks

9.1 qts or buy it in 3 gallons. if they're going to use the same process I used when I worked at Jiffy Lube, they arn't going to want to use a single qt bottle to extract fluid from 9.1 times. So just buy 3 gallons worth and let them flush 12 gallons through. It won't over fill it it'll just over FLUSH it and assure you that you have fresh clean fluid.

btw, i'd just go to Mitsu and dish out the extra cash for ATF+4, but buy a little extra just in case. I hear that you can put ATF+4 in a vehicle that has atf+3. But you can't put ATF+3 in a vehicle using atf+4. lol you figure that out! lol

joseph

lol alright man, thanks a lot
Oh yeah, do they also change the filter or gasket for you too?

they can if they've got it in stock. and don't let them tell you they don't by lookin it up by your car. as far as I know any A604 will work. They should all be the same size? so one for a dodge minivan would be just as good i think.

joseph

Yep...the filter and pan gasket are pretty generic. I'm using standard Fram stuff for any A604.

Corbin

'95 ESI-T
Now with more power and fewer leaks



Gimme fuel...Gimme fire...Gimme that which I desire