Alright everythings been ready to go on my car now. I start the car up get ready to go and its leaking trans fluid. When I turn the car off it doesn't leak at all hardly if any. This is the second time I have taken the pan of and layed a new gasket out with RTV. I went to the dealer and they don't make a gasket for our pans. This is the only thing holding me back from driving now and I've just about had it.



Rebuild FINISHED!
VT 2.0 Shortblock
Built head by ERT, Crower stage 2 cams
Fidanza adj. cam gears
port matched intake manifold
High stall torque converter
Transgo Shift kit
GST Muffler
injen short ram intake
GSX dual piston calipers

12.99$ at autozone w/ filter...and i always use rtv! fuck u all who says im wrong.. but ill tell ya what... ive never leaked! my new trans has a felpro gasket thAts nearly twice the thinkness. but that one cost me 30$.

jake

"THE ATX GOD"

Whats 12.99 at autozone? I didn't catch what you meant. I just bout a new filter for the pan today but haven't put it in yet as I had a feeling I would have to take my pan off once AGAIN. Is this gasket you speak of a pan gasket???


Rebuild FINISHED!
VT 2.0 Shortblock
Built head by ERT, Crower stage 2 cams
Fidanza adj. cam gears
port matched intake manifold
High stall torque converter
Transgo Shift kit
GST Muffler
injen short ram intake
GSX dual piston calipers

yes bro its thepan gasket and filter... so u'll have an extra filter
"THE ATX GOD"

i have a re-usable gasket for my oil pan. it was fairly expensive, but after the 10th time dropping your trans pan you begin to hate rtv.

Originally posted by soulcontroller
i have a re-usable gasket for my oil pan. it was fairly expensive, but after the 10th time dropping your trans pan you begin to hate rtv.

Oh yes. It was only the 2nd time and I already hate RTV.

BTW...I fixed the link, it ended up not being the pan, but the input oil line on my remote filter wasn't sealed correctly.

Car's running good now except for a old alternator belt that squeaks at low idle.


Rebuild FINISHED!
VT 2.0 Shortblock
Built head by ERT, Crower stage 2 cams
Fidanza adj. cam gears
port matched intake manifold
High stall torque converter
Transgo Shift kit
GST Muffler
injen short ram intake
GSX dual piston calipers

Originally posted by xcasbonx
Car's running good now except for a old alternator belt that squeaks at low idle.

man mine does that too and its annoying as hell. with that udp i might get a belt thats like 1/2 and inch smaller cause i have it tightened all the way right now...

WELL ummmm ya so ummm there lol

jake

02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?