I've got a lot of little misc tasks to get completed here before I put my engine back together (this weekend most likely). Anyway I have a aux cooler I am adding. I'm having a hard time trying to locate where I to install this. I'll be installing a remote filter as well during this time. I've searched and found several threads about this install but all pics that were used seemed to be broken links now. I still need to get brackets, fittings, and hose for this setup. If anyone has install pics and some sort of writeup or methods to install please help.


*rebuild in process...too much spent and still not fast enough*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

you can see mine behind the fmic and in front of the ac condensor on the drivers side..

Thanks Matt, that gives me some of an idea. I was thinking of that spot, or if I could squeeze it in on the drivers side below the headlight off to the side? It would be mounted at a slight angle, but air would be rushin in right at it.


*rebuild in process...too much spent and still not fast enough*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

yea, i would have done that but i have a bunch of piping there. that was the spot i was going to put it, but youll have to fabricate some sort of mounting bracket to hold it me thinks.

Yeah definately some fabbing will have to be done. Hardware store here I come!


*rebuild in process...too much spent and still not fast enough*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

I have mine on the passenger side. The holes are there already, just some bar stock and bam your done.

I did what matt did almost exactly, he showed me the same pic when I asked and it helped ALOT.