i just read the post from joe b slow that you should not use this as a tranny fluid. why can't i, cause i've been using that stuff (just added some since i installed the mesh grill and painted the tranny coolers black).
-------jezreel

Its formulated for GM/Chevy transmissions, not for a Chrysler transmission.

Transmission fluid is not like an engine oil. It is subject to a harsh beating and functions as more than just a cooling agent. Therefore, different transmissions require different spec/ingredients to function properly and efficiently.

I too was using dexron/mercon, thinking it was ok.

Boy was I wrong...I hope this helps:)

so can i get the atf from autozone?
-------jezreel

yes get a tranny flush ASAP and get atf3 from autozone or have them put it in at the flush, (and watch them to make sure they put it in

do how much to do a full flush and how many bottles of atf 3 do i need (i have a tranny cooler by the way?).

-------jezreel

the Jiffy Lube i work at charges 96.99 for a flush. If you are getting a quart bottle, you will need about 12 for a FULL flush. That way you will actually get 110% of the fluid out. That is to say that you will flush all the old fluid out, and some new fluid just to make sure you get it all out.

Joseph