How did you do it? I want to wire a switch for mine, but I think I would have to go back thru the computer to do that. Is there a write-up? My dad doesn't know how to do this for electronically controlled cars. He said he could, but it'd be a bitch and he didn't know about the computer.

there is a write up on this page, you just have to scroll down a little bit.

the hardest part of the whole thing was pulling back the electrical tape to expose enough of the black wire to splice lol.

there isnt really anything you have to do with the computer. just cut one wire, and splice 2 new wires into it leading into a switch. the writeup has pics included...

*edit - here is the link to the thread.
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=33&topic_id=945&mesg_id=945&page=

i would definately have a tranny cooler installed as well.

fully agree with S.C. get the cooler if you do this... also... it will trip your codes... a p07003 will show.. but its no biggy




AEM cam Gears,MSD ignition,Chikira 4-2-1 header,Custom 2.5" exhast,Pacsetter hiflo cat ,head p/p , intake p/p 2mm oversize tit valves , t/b p/p , shiftkit , TQ lockup mod , and much mor

I have a 99 and I have been using the TQ lockup switch off and on since we found out about it and have never thrown any codes because of it.

me either, i got a 99 and i only use it when me n my friend are racing and we get up around 70. and i never had a code thrown. also do you still think i needa trans cooler if i only use it for short periods of time spaced out pretty much?

Personally I would run a cooler regardless but thats me. But when you start running the TQ lockup switch you can build up heat quick so I would say yes it would be a good idea.

yea, what ^^ said. and ive never thrown codes either... so i dont know whats up with that.

wisj i knew why too... it trew a p0703 code at me..... but then again the switch was probaly in the wrong posistion..

jake


AEM cam Gears,MSD ignition,Chikira 4-2-1 header,Custom 2.5" exhast,Pacsetter hiflo cat ,head p/p , intake p/p 2mm oversize tit valves , t/b p/p , shiftkit , TQ lockup mod , and much mor

You guys arnt "throwing codes" to the ECU because its not the ECU making the codes. The TCU is throwing the codes, i believe. Cant do the keydance for all that mojo. When I was at the tranny shop they had a huge ass machine, like a medieval game controller. And I wasnt throwing any codes, but hoping to do the mod soon}(