| Go back to previous topic |
| Forum name | Auto Trans- A604 |
| Topic subject | How do i take out the automatic computer? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i33&topic_id=1198 |
1198, How do i take out the automatic computer?
Posted by daltah, Jun-08-03 04:21 PM
The one that behind the radio under the dash.I did a manual conversion and need to take it out know or can i just unplug it.If so wich plug(s) do i unplug?If anyone has anypice of how to take it out or unplug it it would help out.
|
1199, RE: How do i take out the automatic computer?
Posted by daltah, Jun-08-03 07:20 PM
anyone know????
|
1200, RE: How do i take out the automatic computer?
Posted by Avenger, Jun-09-03 05:27 AM
There should be only one plug held in with a 10mm bolt. As you undo the bolt it will pull the plug out. Then just remove it.
|
1201, RE: How do i take out the automatic computer?
Posted by daltah, Jun-09-03 12:46 PM
wheres the bolt located because the computer is tucked far back and hard to get to.
|
1202, RE: How do i take out the automatic computer?
Posted by Avenger, Jun-09-03 01:56 PM
It's actually on the harness itself. It holds the harness down. If you look at the wiring plug you will see what I mean.
|
1203, RE: How do i take out the automatic computer?
Posted by daltah, Jun-09-03 02:08 PM
can you take a pic because i dont know what your talking about?
|
1204, RE: How do i take out the automatic computer?
Posted by daltah, Jun-09-03 02:15 PM
do i need to take of the drivers side panel next to the gas pedal under the dash or the passenger to get to the bot your talking about.
|
1205, RE: How do i take out the automatic computer?
Posted by juggalo, Jun-09-03 08:05 PM
i'm pretty sure its the drives side panel.
|
1206, RE: How do i take out the automatic computer?
Posted by The1Bill, Jun-10-03 03:05 AM
Actually, it sucks to reach from either size. The passenger side is slightly easier, though. If your car is a 1996+, then the A/T ECU is there. It should have gotten in the way of running the linkages, by the way.
-=B-=
|
1207, RE: How do i take out the automatic computer?
Posted by daltah, Jun-10-03 11:48 AM
i had a shop do the swap for me and know the cel is on and im trying to figure out how to take it out or unplug it but cant see where the plug is located
|
1208, RE: How do i take out the automatic computer?
Posted by juggalo, Jun-10-03 12:24 PM
just cut wires for it and tape the ends up. you don't need them anymore.
|
1209, RE: How do i take out the automatic computer?
Posted by Avenger, Jun-10-03 12:40 PM
You'll keep having a CEL until you get an MTX ECU.
|
1210, RE: How do i take out the automatic computer?
Posted by daltah, Jun-10-03 02:15 PM
i have a 99 manual ecu. and what wires do i cut i dont even see any that connect to the computer behind the radio.And what color/colors are the wires that i cut?
|
1211, RE: How do i take out the automatic computer?
Posted by daltah, Jun-11-03 03:35 PM
does anyone konw which wires to cut or what color because i cant even see any
|