I am in Albion, NY

alright well i had a threadd about this before, but it got fucked up when some buyers backed out and some buyers had already been turned down, so im making a new one.

I AM PARTING OUT MY BLACK 98 ECLIPSE RS. 5 SPEED TRANSMISSION <53k miles> WITH 163k MILES ON CHASSIS AND ENGINE. TAN INTERIOR.

everything for sale. please ask me about a part along with a CAPS picture and an offer for the item... anyone i have something pending with in the past week i WILL be getting back to later tonight.

pic of the car, some of that can be decieving so im just gunna tell people straight up if the part they want is garbage.

I NEED THE FRONT CROSSMEMBER THAT RUNS UNDER/Behind THE ENGINE ASAP!!!

get me a price shipped to 21221

hey man get me a caps pic, i think i know what you need, and i can get it to be shipped to you tomorrow or the next day, i just need to know the exact part.

02 sensor, front left fender...vacume lines...those wheels and tires...clutch... 19438 prices, shiped please!!!

need everything for the drivers rear suspension. From the wheel lugs to the bolts on the body and everything in between.

Originally posted by Chamuko
need everything for the drivers rear suspension. From the wheel lugs to the bolts on the body and everything in between.

like by everything do you mean shocks and struts? cause thats suspension... and they are all going as a set.

Originally posted by BurntRed22
02 sensor, front left fender...vacume lines...those wheels and tires...clutch... 19438 prices, shiped please!!!

which o2 sensor? but $40
drivers side fender is trashed...
vacuum lines i can try...$10
wheels and tires id say $400 shipped, since of the size and weight, but they are a little beat up and the powder coating job is coming off.
the clutch shit the bed, thats why im parting it.

Just sent you a couple PM's. With that dash and console, I would also like the black vents, and basically everything black that is attached to it, lol. Also, what is that suspension setup?

kyb2 struts and tein lowering springs.

how much for the drivers side and passenger side drip moldings?

you know the black piece that goes above the window on the outside.

dont know how to put pictures on ehre so heres the link to the caps page:

http://www.2gnt.com/CAPS/main51/main51sub030.html

PART #S: 71145L
71145R

the rear if itss not shot... and how bad are the plugs...also...where did u say u were located again?

Originally posted by donnyb373

do did you need the crossmember or the centermember? cause you said the thing that goes underneath and behind the engine.

Originally posted by BurntRed22
the rear if itss not shot... and how bad are the plugs...also...where did u say u were located again?

o, the rear is probably shot.

the plugs were put in new with the wires about 2000 miles ago.

Originally posted by dsmtuner1
how much for the drivers side and passenger side drip moldings? you know the black piece that goes above the window on the outside. dont know how to put pictures on ehre so heres the link to the caps page: http://www.2gnt.com/CAPS/main51/main51sub030.html PART #S: 71145L 71145R

STILL HAVENT REPLIED TO ME? YOU SELLING THESE HOW MUCH?

Originally posted by dsmtuner1

Originally posted by dsmtuner1 how much for the drivers side and passenger side drip moldings? you know the black piece that goes above the window on the outside. dont know how to put pictures on ehre so heres the link to the caps page: http://www.2gnt.com/CAPS/main51/main51sub030.html PART #S: 71145L 71145R

STILL HAVENT REPLIED TO ME? YOU SELLING THESE HOW MUCH?

ummm, send me an offer, i dont know how to get them off though, i can try.

Originally posted by n3r0 FmX

Originally posted by dsmtuner1

Originally posted by dsmtuner1 how much for the drivers side and passenger side drip moldings? you know the black piece that goes above the window on the outside. dont know how to put pictures on ehre so heres the link to the caps page: http://www.2gnt.com/CAPS/main51/main51sub030.html PART #S: 71145L 71145R

STILL HAVENT REPLIED TO ME? YOU SELLING THESE HOW MUCH?

ummm, send me an offer, i dont know how to get them off though, i can try.

LOOK AT THE CAPS PROGRAM quite self explanitory let me know if you can ill pay you 30 shipped for them. you can put them in the same box let me know

how much for the new plugs

send me an offer on anything, for anyone, im not gunna give out prices.

How much for the rear hatch shipped through greyhound to 85027? and how much for passanger side fender

Originally posted by eclipseman1999
How much for the rear hatch shipped through greyhound to 85027? and how much for passanger side fender

rear hatch is rusted out... for some reason the only thing rusted out on the car....

and heres the link for the passenger side fender on ebay already...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=018&sspagename=STRK%3AMESE%3AIT&viewitem=&item=280042492216&rd=1&rd=1

actually you ARE supposed to give prices thats the rules of the forum, YOUR the one parting it out, i wont bid on anything, if i dont know the shape its in, put up a price, if not, then im not interested

well four plugs at 1.30 a piece are what... 6.20 for four plugs.

Originally posted by BurntRed22
actually you ARE supposed to give prices thats the rules of the forum, YOUR the one parting it out, i wont bid on anything, if i dont know the shape its in, put up a price, if not, then im not interested

and plus i USUALLY go with everyones price they give me, so wouldnt you rather have your own price that YOU want instead of the price I want?

Originally posted by BurntRed22
actually you ARE supposed to give prices thats the rules of the forum, YOUR the one parting it out, i wont bid on anything, if i dont know the shape its in, put up a price, if not, then im not interested

ill sell you the plugs for $5 shipped, plugs and wires for $12 shipped.

Originally posted by dsmtuner1

Originally posted by dsmtuner1 how much for the drivers side and passenger side drip moldings? you know the black piece that goes above the window on the outside. dont know how to put pictures on ehre so heres the link to the caps page: http://www.2gnt.com/CAPS/main51/main51sub030.html PART #S: 71145L 71145R

STILL HAVENT REPLIED TO ME? YOU SELLING THESE HOW MUCH?

alright, these are sold, sorry.

HMMM funny i was the only one asking for them but there sold now.

Originally posted by dsmtuner1
HMMM funny i was the only one asking for them but there sold now.

there are many eclipse sites, and theres such thing as pm's. which is where i sold them, in a pm...

How much for the rear bumper cover?

80 plus shipping?

Just thought I'd let everyone know that even though this guy hasn't been on the forums long, he is a good businessman. I ordered some things from him and the transaction was very smooth, shipped fast and when he said he would, and recieved it two days later in the EXACT condition he described (if not better). 2gnt could use more honest sellers...

Originally posted by GreenRicer
Just thought I'd let everyone know that even though this guy hasn't been on the forums long, he is a good businessman. I ordered some things from him and the transaction was very smooth, shipped fast and when he said he would, and recieved it two days later in the EXACT condition he described (if not better). 2gnt could use more honest sellers...

what the hell did you buy from me, were you the console and head and everything?

Yea bro...

Originally posted by GreenRicer
Yea bro...

so the dash and everything got there in good shape? cause they told me they couldnt guarantee anything in that box i made, hahaha, like it?

Any progress on the interior parts I requested?

front bumper shipped to 18014, is it in good physical shape, dont care about paint



Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit

Originally posted by python6586
front bumper shipped to 18014, is it in good physical shape, dont care about paint

eh, its all tore up, its one of those ebay aftermarket ones actually, and it didnt stand a chance on a lowered car.

alright, so im leaving for exas in a month now, plans have changed...

i need everything on this car gone, now... i will probly accept most semi-reasonable offers... still need to make money to head down there, so im not GIVING away parts.

major things...

tranny $400 plus shipping, 55k miles on it.

bottom end... $150 plus shipping.

anything else you need, send me some messages. ill tell you if its still there...

THERE IS NOTHING INTERIOR LEFT, NO HEAD EITHER

thank you, and please buy everything from me, cause in about 2 weeks its going to the junkyard.

Originally posted by daes_venge
Any progress on the interior parts I requested?

not too much, the only days i can get out to the car are monday and tuesday, ill get back to you soon.

$20 Shipped to 33774.

For the Thermostat fitting, PNC 10113 seen here:

http://www.2gnt.com/CAPS/main14/main14sub120.html

and the centre console tray right below the radio.

Thanks.
Sean

i think i need your 420a!!!

Originally posted by avengerowner22
i think i need your 420a!!!

all i have is the bottom end left... you can have it for the price i have listed 3 posts above though.

PLEASEPLEASEpLEAse have the thermostat housing shown here part #10100.
$20 shipped or you name the price. to Pacifica, CA, 94044

how many miles on the block? anyhting performance on it? and how much shipping to 19567? it can be a business addy, thanks

Originally posted by dcboyz4eva
how many miles on the block? anyhting performance on it? and how much shipping to 19567? it can be a business addy, thanks

i wouldnt think anymore than $100 for shipping... thats max im saying, it was only $20 for the head. and theres 165k miles on it.