95' eclipse needs MS system with harness if possible.

Any leads on the best place I can buy this are also appreciated.

Is RS-autosport the best?

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=94986&mesg_id=94986&page=2

It was on the second page. Let me know if you would like it.

I was looking for more of a assembled kit if possible.

I'm sure you can pay they people to do it. Also i have already built one, all you need is a soldering pincel and some time. It's all quite easy. it will save you hundreds of dollars and you will need mod it down the road might as well understand what everything is. That was my thinking at least.

Good luck

I have a harness if your interested 40.00 shipped

Terry

Is the harnes bare bones or does it include the sensor connections?

Its a 10' harness with sensor connectors. No injector plugs. If you want the injector plugs add 10.00.

I can make the harness as long as you want really for additional cost.

Terry

Sounds like a good deal to me.

Are you referring to the large disconnect connector for all four injectors or the four seperate connections?

I installed an OBX intake manifold with the fuel injector wires running under the manifold. It would be nearly impossible to get the middle injector connector back on. It took me a while to grind away at the manifold to allow enough space for the injector connector in the #2 cylinder.

the four individual pigtails for each injector. If your connector are hitting the manifold, it sounds like the connectors are facign downward. Rotate the injecots so the plugs face upwards. That should correct your issue.

Terry

I think I will have to go ahead and get a kit from a vendor like RS-autosport.

Thanks anyway.

Sorry for the hassles.

On second thought I think I will take it if it is still available.

You seem to really know the MS system and it would probably save me lot sof time in the future.

Do you accept paypal?

paypal is terrence.godfrey@sbcglobal.net

Terry

I sent payment for harness without injector plugs. I will need to make the 5 prong female female tip to use with the current injector harness. If you could do this at an extra charge I will gladly pay.