I have 2 Megasquirts for sale.

1. MS v2.2 with 2.5 bar map sensor (20psi). Comes with 10' harness. Does NOT come with Injector harness, sensor pigtails, or sensors.

2. MS v2.2 with 2.5 bar map sensor (20psi). Comes with DB 37 and 10' of harness.
Does NOT come with Injector harness, sensor pigtails, or sensors.

340.00 shipped each with harnesses.
MS ECU's come with all software on a CD

Also available to compliment the kits above:

Injector subharness and sensor pigtail connectors...20.00 each

Sensors...40.00

3 bar MSD map sensor (external sensor, can mount anywhere)..50.00

Terry

Bump, i will entertain offers

$350 shipped with sensors?

you have to clearify a little sice there is a lot listed.

350.00 for the MS, 10' harness, sensors. No injector plugs or sensor pigtails?


Terry

I'd imagine I need it all.

370.00 then, i will meet you halfway

Terry

C'mon. 350. ;)

350.00 and you find your own injector plugs and pigtails at a junk yard.

Here is whats invested to give you a over all picture.

MS 280.00
Harness 60.00
Shipping...10.00
Sensors....40.00
Injector plugs and pigtails are roughly 5.00-10.00

Thats 400.00. Meet me halfway 370.00 shipped. 350.00 + shipping is 360.00. Come on work with me here...lol

Terry

I'm so broke. Even $350 will put me in the negatives, but I REALLY NEED TUNING. I've been doing my best to find some sort of fuel management at the lowest price possible but I've become very impatient. I recently dyno'd and AFR's were off the chart rich...so I bought a used SAFC on eBay and it ended up being broken (awaiting $150 refund). Now I've changed my route to MS. I'd much rather have MS for a whole world of reasons. Just happened to be looking for a cheap unit and saw this post, and I know you are a very reputable and respectable 2gnt member. Would you take the $360 or are you firm at $370. I know it's only $10 but I just bought a house and every little bit counts. Either way, I will definetally take everything as a set. That is everything I will need to do the install (minus FPR), correct? And would I be able to manage timing advance with this unit in the future? Also what's the difference between the v2.2 boards and v3? If you don't mind a quick explanation. Thanks.

360.00 it is.

All you need to build yourself is the fuel regulator and lines. Obviously you will need a laptop and a db9 cable from the laptop to communicate with the MS. Those are roughly 10.00 at and computer store. Look for a cable to extend the monitor cable.

360.00
MS with 2gnt mods
Harness with Injector plugs and Sensor pigtails
Sensors

Pmed you with payment instructions

Terry

PM sent!

replied.

Bump still available

1 MS sold - 1 MS kit still available.

Wanna sell me just the completed board? ;-)

Rather than Mod one of these i will order and make you another MS CPU. Your setup is slightly different with how you have the map configured. Give me a ring and we can iron out any details.

Bump still available

well i would like it! i need it all ms,harness,sensors,pigtails,and injector harness. i also need or want it to control spark timing! if possible. i've got cash in hand just give me a price! let me know thanks!

og yeah with a 3 bar map sensor!

Well its 360.00 for the MS, harness, Sensors, Pigtails, injector harness and a cd containing all the software needed.

Add 40.00 for the 3 bar sensor and I can ship this out as soon as tomarrow.

If you dont have a comm cable for your laptop add 10.00 for that. I dont currently have a spare so that i will have to order and ship out a few days later. It can also be acuired at any computer store that sells a cable to extend you monitor cable.

Terry

pm sent. i already had a cable. though thanks so it'll be 400 shipped?

correct

payment sent. one more question what kind of injectors will i need. what is it setup for? thanks

Both units sold. These are setup for high impedance injectors. A few members have run smaller low impedance injectors without issue (680cc and smaller)

Terry