Hi guys!!!

I'm looking for part # MR485143 or MI2502105... basically I'm looking for the driver's side head light assembly (they're too foggy). I would really appreciate if anybody could point me in the right direction (if any) for a good deal on one (or both).
By the way.., it's a 99 GS... Hell, I'll even go with the clear covers...
Thanks in advance...

put them in the oven bake them open, clean them out and bake em back shut. you'll be good to go

Originally posted by EclipseTenzoR
put them in the oven bake them open, clean them out and bake em back shut. you'll be good to go

Thanks for the input... Actually I just want to repalce them 'cause they're not only foggy, they're scrathed and opaque... (some water drops that condenses or get trapped inside the head lamp)

any other suggestions...

Originally posted by EclipseTenzoR
put them in the oven bake them open, clean them out and bake em back shut. you'll be good to go

X2, open then, clean em, wet sand the outside and ur good to go, but if ur still set on buying some ones, i know of a guy who will buy yours...

Originally posted by edxmon

Originally posted by EclipseTenzoR put them in the oven bake them open, clean them out and bake em back shut. you'll be good to go

X2, open then, clean em, wet sand the outside and ur good to go, but if ur still set on buying some ones, i know of a guy who will buy yours...

but how do i actually do the wet sanding part... what type of sanding paper I need???

start with 1500 grit sand paper and move up to 2000 grit. KEEP THE SANDPAPER WET! Once you are done it wouldn't hurt to spray them with a glossy clear coat because sanding them will take at least some of the factory protectant off of the lens. I just got done doing that with my headlights about 3 weeks ago and they look GREAT!

And as for the oven... make sure you take the bulbs out first as a precaution and also make sure the wires arent in contact with the grill in the oven or the sides of the oven because they will melt. Do about 6 minutes on 200 degrees and the lens should pop right off. When you go to put the lens back on, get all of that old ass glue out of there and get some silicone glue and seal the lenses back on with the metal clips. Let the glue cure for about 24 hours and you'll be good to go!

If you ever decide to get new headlights and stuff, I'll take the old ones off your hands (assuming they are 2GB) if they're a reasonable price and fix them up myself.

You just need time, water, and sandpaper.

there is avery good faq by Squid in the Ex/int section, read it all and remember to get the 3m liquids i recommend, they work wonders! just ask Jsupertran (sp)