Ok I got everything hooked up on my new engine and turned the key, it sounded good but it wouldnt fire and then I smelled gas... the high pressure line that goes from the fuel rail to I'm guessin the fuel filter broke right where the crimps are... please someone have it... It is about a foot long (give or take 2 inches) one end has the pressure fitting w/ an o'ring on it and two holes for the bolts that connect it to the fuel rail and the other end has the bolt w/ a hole through the center for the fuel to enter the hose.. I need this asap, like yesterday, please help thanks

Take your factory line off, gring the crimp off the fitting (front the side so the crimp can be peeled back and removed). Get some high pressure fuel injection hose and sqeeze the hose onto the fitting barb, then clamp it with a couple clamps per fitting.

Terry

Thanks Terry Again haha.. it worked, now just to get her started..thanks though again