ok,i was going about 80 and i hit a patch of ice, lost controll, jumped a snowbank,hit a tree sideways,and went back on the road.

DAMAGE done: drivers side rear window smashed with a HUGE dent (tree impact) bent that side in,the rear bumper hit the tree for the 2nd time and its gone, along with one tail light and middle piece gone, one rim warped sooo many ways. pics coming tomorow.

ok, here is the deal, the boneyard will give me 300$ for the car.I know there are parts that you 2gnt's fanatics want.She had 122,000 miles,and when towed her back home, i poped the hood and the cerpantine belt was loose?..snapped I'm not sure.Not sure if she runs or not.I'm gonna fire her up, the car has a brand new clutch. She was in great shape overall,anything that anyone wants, let me know. call my house 1-207-899-1902 (ask for sam) or hit me up kaptainboznia86 (aim) or sdtoocool_15@yahoo.com

ANYTHING anyone wants off this thing, car is black, good paint, gray interior, anything.

seats,cluster panel, doors?...anything.

driver side a pillar, gauge cluster trim, and HVAC cables.

if the car doesnt have cruise then i want the throttle cable

ill take the armrest with tray .

How much for the tranny shipped to 13662???

i would like the factory radio bracket if it has that pocket underneath the deck as well as the radio bezel if you'd be willing to ship to Canada..

How much for the trunk panels ? Also need a variety of screws. Tray under arm rest.

Where you from? I would take the engine, i could always use a spare.

how much for the passenger side outer door handle? assuming its in good condition of course. tia!

How much for the wiper control assembly, and the cargo cover? Shipped to yakima, WA 98908. Thanks.

upper intake manifold, no sensors, no TB needed,I also need all the exhaust manifold studs and bolts, and the center trunk panel

total shipped to 19713 please.

if you're close to newark,de/ elkton,md Ill give you 400 for the whole car

ok,

middlepiece, gauge cluster, throttle cable, body, hvac cables?..

motor and tranny guys im me personally please


i will sell this cheap

ok...basically name a good price. idont care about $$ really at this point.


EDIT: i sprayed that bolt loosening stuff on the rusted ones on the manifold.as for anything else,the TB goes to the highest "bidder"..
the door handle piece is in ok shape.the back cover for the trunk is in great shape.

pm sent

does this car have disk brakes in the back? if so, I need e-brake cables.

ok thanks, though i had first shot on the TB?

i'll take the vacuum hose splitter from the back of the intake manifold since I broke one stem on mine :-(



that is if ^ Malenko ^ doesnt need it w/ the manifold.

the sensor plugs with some wire for the tranny reverse and speedo sensors ( sensors too if you want ;) ).

The rear tranny bracket ( the black one bolted to the tranny).

fuel rail and the line that goes to it from the firewall

Clutch bolts

Flexplate to crank bolts

Tranny to block bolts

thanks.

10 bux shipped for the throttle cable if its not a cruise cable

If you have the little clips that the rear trunk cover strings i need one. Where in maine??

I need
1: a coolant overflow resevoir, in good shape
2: and the noise compacitor looking thing that bolts to the valve cover and has a single wire comming off it.

$11 shipped? :)

Ill take the dash if possible. thanks anthony

only thing I need is the intake manifold itself.

Optikal took my 60mm jeep TB and replaced it with his, so my car no longer runs (AIC hole is plugged on the intake mani to make it work with the jeep TB, so the stocker I have now wont let the car idle, it stalls EVERYTIME)


not to mention the exhaust studs & bolts. Oh yeah, oil pan too!

PLEASE PM/EMAIL ME ASAP

I need an oil pan if you dont sell it with the engine

I also need a sturdy rear motor mount. email: sike@comcast.net

i need an ecu if she's a standard?

Still have shit available?

I need the MAP, TB with all sensors (if not already taken),starter. Let me know.




Nick
97RS

need black, stock shift knob.

i need the throttle cable if it is cruise and the egr system.

cancel my request for the vacuum splitter. Found one already.

if the entire shifter assembly has not yet gone, i'll take it asap

Desperate need of tranny and passanger side door handle

Does the center console have the lid/arm rest? I'm looking for one.

I'll take the entire center console, and both panels that go under the dash on the side of the center console, how much?

if still available, i want entire REAR DISK BRAKE ASSEMBLY minus the rotors. will send pm