Ci kit


It includes everything listed on their site except for the oil line kit(my friend already purchased), fuel pump(threw my old one out after I installed the new one0.

It also includes

-flanges and piping to make a down pipe(not everything needed but more than half)

-egt bung welded in the manifold

-greddy type rs bov new never used

-obx fpr w/ fuel press. gauge

-missing link

I am asking 1100 for the kit, I have fixed everything that was a bit shady about it, the goo ye hose that went from the WE acuator to the compressor housing, replaced the gasket in the compressor housing, purchased ss blots/nuts/lock washers for the turbo to manifold hook up. And Re-painted the charge pipe and manifold with high temp motor paint(on the manifold I used VHT 2000 deg. paint.)

I am also selling a cyl head off a 96 talon with 70k orginal miles. The head comes compleat with everything except for 3 rockers which were lost during shipping, I dont know if the head needs to be decked or not but from what I can tell it dosent show any sings of excessive heat or abuse. The valve seals seem to be good ( never ran it on a car) springs, cam seals all good. Asking 200.

Thats if for now, if you want to see any pics or have any questions e-mail me at Dontcallmepete@yahoo.com. I check that more offten than pm's. I do have pay pal but its currently getting verified, if you have a way to get money to me... ill take it.

How much for the missing link?

can i get some info on that headliner gauge pod? pics maybe?

I will buy the BOV, how much?

Ebay it man...I sold my kit for 1600 bucks on Ebay and had a good bit less in it than that.

I want to sell the bov and missing link with the kit so I can get a bit more for it, It will be priced a bit higher when I put it on e-bay, I just fuigered I'd give the 2gnt community a little break. For the head liner I will see if I can get pics up later on today but the problem is that the person who had my car before me got an after market sun roof so there is a hole in the center of it that would need to be patched for it to work on any other 2g but its all fiberglass and currently painted black. I have it set up to hold 3 gauges.

What kind of head liner is that???

Originally posted by Kirby
What kind of head liner is that???

Ghetto ass bondo, mas epoxi, evercoart epoxi, carboard, duct tape, lamnating resin, krylon paint head liner with an after market webasto sun roof,

Originally posted by youkickedmydog

Originally posted by Kirby What kind of head liner is that???

Ghetto ass bondo, mas epoxi, evercoart epoxi, carboard, duct tape, lamnating resin, krylon paint head liner with an after market webasto sun roof,

Lol that is ghetto. Now sell me the dam missing link.

selling that with the kit as well, just make a voltage clamp, about 1/16 of the price and more reliable. I regret wasting 70 bucks on that little bastard.

i want the fuckin BOV DAMNIT!