Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectFS: PART OUT: 1998 Talon ESI
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=81436
81436, FS: PART OUT: 1998 Talon ESI
Posted by slodsm, Dec-31-69 06:00 PM
I have a 98 ESI sitting on 17x7 ICW tuner 7 spoke wheels with 205/40 tires with very mild camber marks on the rear and plenty of tread left. Car is complete, body is almost perfect minus a small crack on the front bumper and a small dent on the passenger side front fender. Turbo and intercooler were sold on here last year as well as internals. Block and crank are trash but the head is mint with 60K on it, tranny is good, and interior is good. It may be about 3 days before I start letting parts go off of it but if you are interested in anything on it, post up and let me know what you need and an offer because this has to go. New project car was bought yesterday plus my sprayed crotch rocket leaves no room in the garage for this thing. Thanks again and you can check my feedback here and on ebay (user name 04_1000rr) and I have never had a complaint. Thanks guys.


Edit, color is black, interior is black with grey seats.
81438, RE: 1998 ESI part out
Posted by djtrickee, Dec-31-69 06:00 PM
Did it have a sunroof? If so how are the sliding panels?
81439, RE: 1998 ESI part out
Posted by wickedtalon, Dec-31-69 06:00 PM
Does it have cruise? If not, I need the throttle cable.
81442, RE: 1998 ESI part out
Posted by Murfsmaster, Dec-31-69 06:00 PM
i need the drivers side fender and both the clutch master and slave cylinder. thanx
81444, RE: 1998 ESI part out
Posted by Malenko, Dec-31-69 06:00 PM
i need a copmplete 5 speed swap (in your case, ECU too)

and I need as many interior plastic panels as youre willing to part with
81445, RE: 1998 ESI part out
Posted by turbo8u, Dec-31-69 06:00 PM
i need the cupholders if its a grey interior, some mother fucker broke into my car and stole them....

wtf
81446, RE: 1998 ESI part out
Posted by slodsm, Dec-31-69 06:00 PM
Ok, I have a sunroof, it's all perfect,

No cupholders, no idea why lol but I didn't get them.

It is a 5 speed car and I have the complete tranny, axles, ecu, shifter, pedal assy and everything else. Where are you located?

The drivers side fender is perfect.

Shoot me some prices on what you are willing to pay for this stuff and if it will be picked up or shipped.

I am located in Jacksonville NC.
81448, RE: 1998 ESI part out
Posted by Malenko, Dec-31-69 06:00 PM
Im in Newark,De (19713)
the amount I can offer shipped depends GREATLY on the cost of shipping. I dont think it'd be cheaper to drive down there and pick up since gas is $3.20 a gallon
81447, RE: 1998 ESI part out
Posted by Max-Eclipse, Dec-31-69 06:00 PM
Originally posted by Malenko
i need a copmplete 5 speed swap (in your case, ECU too) and I need as many interior plastic panels as youre willing to part with


I need a bell housing. But I guess the previous poster will get it.

I need the sunroof glass if it has a sunroof. I also need drivers side mirror (cover and assembly) if it's a power mirror. (and if it's the same as the eclipse... i assume it is...)

I need the rear quarter glass (w/e it is called) and the rear hatch glass... shipping would probably suck on that though.... but let me know.

EDIT: You beat me to the submit button I guess... $25 shipped for the sun roof? LMK know on the othet stuff.
81449, RE: 1998 ESI part out
Posted by Star Turbo Talon, Dec-31-69 06:00 PM
what condition are the fenders in as far as paint and dents. I am looking for drivers and passenger fender in awesome shape.

If they are in great shape then shoot me a price shipped to 60544

Thanks

Terry
81452, RE: 1998 ESI part out
Posted by Max-Eclipse, Dec-31-69 06:00 PM
Originally posted by Star Turbo Talon
what condition are the fenders in as far as paint and dents. I am looking for drivers and passenger fender in awesome shape. If they are in great shape then shoot me a price shipped to 60544 Thanks Terry


I have a pair of fenders... I think think someone already has dibs on the one in this thread... I'll get you pics sometime...
81453, RE: 1998 ESI part out
Posted by Star Turbo Talon, Dec-31-69 06:00 PM
well if it falls through i am interested, if not then i am still interest in the other one.

Terry
81454, RE: 1998 ESI part out
Posted by slodsm, Dec-31-69 06:00 PM
OK guys, I will pull the car out in the AM and take pics of the paint job and such. When she went in there, the paint was perfect on both fenders but the passenger side has a slight dent from car being to low to get off the jacks, had to have some friends help me with picking it up.

I tottaly agree on the price of gas being too much. Let me try and find out about truck freight in on tuesday (damn long weekend) and then I will get back to you guys on all of that.

Seriously, anything you want aside from the hood is in practically mint condition. This was my baby until the damn waste gate stuck and I saw all of my money and pride and joy melt. I just lost all interest in it, it was garaged for 2 years and never touched. Now I am building an all motor honda and need the room.

The mirrors were power, sunroof, every option aside from leather/power seats and the damn cupholders. I will get back to all of you with shipping estimates as soon as humanly possible for the parts.

I will send quotes in order of who called the part first as well, thanks again guys.
81464, RE: 1998 ESI part out
Posted by Max-Eclipse, Dec-31-69 06:00 PM
Originally posted by slodsm]
This was my baby until the damn waste gate stuck and I saw all of my money and pride and joy melt. I just lost all interest in it, it was garaged for 2 years and never touched. Now I am building an all motor honda and need the room.
You'll be back.

Anyways, I might need the dash... not sure... LMK on pricing for that too
81650, RE: FS: PART OUT: 1998 Talon ESI
Posted by slodsm, Dec-31-69 06:00 PM
OK guys, I have found a way to ship fro a reasonable price (I guess reasonable), It is by Forward air. It will pnly be delivered to a major airport in your area and you will have to go pick up the pallet there. If anyone is interested still, the approximate price for the weights I guessed would be 120 bucks for the full 5 speed conversion, tranny and all, everything else goes down from there. Post up if you are interested in this and make me offers. This thing has to go.
81654, RE: FS: PART OUT: 1998 Talon ESI
Posted by djtrickee, Dec-31-69 06:00 PM
Im still interested in the sliding sunroof panels. How much would those be shipped to Denver, CO. I can also send you a prepaid fedex label and you can just box em up and slap it on there. let me know!

-chris b.
81655, RE: FS: PART OUT: 1998 Talon ESI
Posted by J, Dec-31-69 06:00 PM
Does it have cruise, if so... want $25 shipped for the steering wheel w/ the cruise arm (no air bag)?

- J
81660, RE: FS: PART OUT: 1998 Talon ESI
Posted by abryant2004, Dec-31-69 06:00 PM
do u still have the front bumper if so how much do u want for it
81661, RE: FS: PART OUT: 1998 Talon ESI
Posted by turboed420a, Dec-31-69 06:00 PM
Hey man I need a black center console, don't care about the cupholder, I just need a black console. Let me know if you have it, turbo420a@hotmail.com
81664, RE: FS: PART OUT: 1998 Talon ESI
Posted by slodsm, Dec-31-69 06:00 PM
OK, everyone who has asked about parts since the shipping quote has a PM back. Thanks guys.
81668, RE: FS: PART OUT: 1998 Talon ESI
Posted by BumpinTalon, Dec-31-69 06:00 PM
how much for the front bumper?
81670, RE: FS: PART OUT: 1998 Talon ESI
Posted by slodsm, Dec-31-69 06:00 PM
Give me an offer man, I have the matching rear spoiler as well if you want the set.
81671, RE: FS: PART OUT: 1998 Talon ESI
Posted by DarkEclips96, Dec-31-69 06:00 PM
I need a oil pressure sender, the 2 prong type. Let me know...
81697, RE: FS: PART OUT: 1998 Talon ESI
Posted by Eclipsegsx012, Dec-31-69 06:00 PM
How much for the Sunroof rails, 98 high rise wing?
81710, RE: FS: PART OUT: 1998 Talon ESI
Posted by Jem09, Dec-31-69 06:00 PM
Peace,

Would you be willing to remove the entire rear brake assembly? Hubs (both sides), Calipers & Brackets, Brake Lines. I need this set up to swap the rear drums from my 97' RS. I don't want the rotors or pads. How much for them shipped to 37042?
81711, RE: FS: PART OUT: 1998 Talon ESI
Posted by Jem09, Dec-31-69 06:00 PM
I forgot to ask about the three Autometer (Boost, A/F, EGT) gauges. How much for those also shipped to 37042?
81712, RE: FS: PART OUT: 1998 Talon ESI
Posted by 96rs-t, Dec-31-69 06:00 PM
still got the 440cc injectors?? if so, are they direct fit or resistor equipped? how much?
81811, RE: FS: PART OUT: 1998 Talon ESI
Posted by slodsm, Dec-31-69 06:00 PM
Sorry guys, gauges and injectors are gone already.
81859, RE: FS: PART OUT: 1998 Talon ESI
Posted by MiTsUEcLiPsEgS98, Dec-31-69 06:00 PM
What color is the interior because i need both door panels and all of the bezels if available.
81860, RE: FS: PART OUT: 1998 Talon ESI
Posted by MiTsUEcLiPsEgS98, Dec-31-69 06:00 PM
Scratch that. Since it is black w/ grey I need both door panels and all bezels if possible.
81948, RE: FS: PART OUT: 1998 Talon ESI
Posted by Malenko, Dec-31-69 06:00 PM
got a shipping quote on the complete tranny swap yet? I never got a PM from you.
81995, RE: FS: PART OUT: 1998 Talon ESI
Posted by Nine5eclipse03, Dec-31-69 06:00 PM
I need the passenger side rear seatbelt bolt cover, the center HVAC control frame(center dash peice), signal switch. lmk
82076, RE: FS: PART OUT: 1998 Talon ESI
Posted by Jeff_99gs, Dec-31-69 06:00 PM
Does it have the stock camber parts, or an aftermarket camber kit? I need the stock front camber anchor bolts if you have them.
I generated this page in 0.0084869861602783 seconds, executing 7 queries.