I have alot of parts from a 420a. The motor had spun a bearing and with over 120k miles, i decided to just swap in a lower mileage engine. Since my new motor was from a car that got rear-ended, i got a huge load of parts.

I have so far taken off and ready to sell the following:

-stock fuel rail, injectors, harness.
-valvecover
-throttle position sensor + others.
-throttle body
-upper intake manifold
-stock exhaust manifold
-cam gears, cams, cam caps, lifters, ect.

the head and block are still intact.

make offers on anything, as long as its reasonable i'll let it go.
if theres something not listed i may have it, please note, these are only engine parts the rest of the car was junked after we pulled the motor out.

how much are you asking for the valve cover? And what kind of condition is it in? Thanx

Ooh...can I get the O-ring for the feed side on the fuel rail?
Alvin

http://www.cardomain.com/id/96rst

how many good rods do you have? i need 3 but if you got one or 2 good ones i might be interested.. also how much for the oil pan?

Hey, I'll take the cam gears for $15 shipped if you want. Let me know. Thanks.
~Jeffo


Like my tail lights? Get used to looking at them.

How about $20 plus shipping for the valve cover? Its kinda dirty but there isnt any cracks or anything, im sure you could clean it up very nice or paint it.

I have 3 good rods, i believe. I havent pulled the motor apart completely yet. If you live closeby and want to come and pull whatever you need off, you are free to do so.

The oil pan has some dents in it from transporting the motor also, i dont know if you'd want it.

$15 shipped is little low for the cam gears, since shipping would be a good 5 bucks. $20 and they are yours.

And Alvin, i dont really feel like pulling apart the fuel rail, got a pic of where the o-ring is?

Just two small bolts that hold the fuel feed line to the rail and there's an O-ring that's there.
Alvin

http://www.cardomain.com/id/96rst

Yeah i wont be parting out the pieces that much, as of now i have enough parts laying around.

$35 shipped for fuel rail and harness.

Originally posted by eclipse982nrRST
$35 shipped for fuel rail and harness.

Consider it yours. PM me on how you would like to pay and such.

email sent

Okay i have the motor taken apart. The piston had cracked and it looks like everything except the piston and block are intact.

I have the following:

Complete head with everything for $150 Pick-Up ONLY
Three Pistons with Rods *BEST OFFER*
Black Valve Cover $35 Shipped OBO
Fuel Injectors, Rail, and Harness $35 Shipped OBO
Stock Throttle Body $20 Shipped OBO
Cam Gears $22 Shipped OBO
Lower Steel Coolant Tube $15 Shipped
Upper Intake Manifold $20 Shipped
Whole Timing Belt Cover (1 small crack) $15 Shipped)
Throttle Position Sensoer $15 Shipped
EGR Valve $15 Shipped
Stock Exhaust Manifold $20 obo + s/h

Local pick-up is great. I live in Arlington Heights, right off highway 53, could meet at woodfield mall if needed or the 53/90 junction.

I have more stuff, ask if you need something i may have.