Let me know what you need, and make me an offer. Don't bother if you're not serious. This is a 95 RS with a manual transmission. Gray cloth interior. I have a couple extras of things I will list as I go through them. I will email pics upon request. I have 2 heads. 1 has been cleaned, disassembled and hot tanked by the machine shop and is ready to be sent away to be ported. The other hasn't been cleaned up...everything removed except valvesprings. Cams will be separate. I have 2 intake manifolds..1 needs port work finished. I have 1 black valve cover in great shape, a block in great shape, lots of misc engine parts, an AEM cold air intake with filter that was lightly used. A 95 manual(federal) ECU, 95-96 Talon TSI sideskirts...no cracks(need to be primed and painted) 1 set of regular taillights, and the complete set of TYC elegante black taillights. I have a couple gauge clusters..1 is missing alot of bulbs. 1 set of ebay coilovers unopened. 1 set of aluminum 14" wheels in Awesome shape! Tires have no tread and will be removed. I have a brand new MLS OEM headgasket. And too much more to list. Ask and you shall receive.

PM SENT!

clean head is called for as of now

Originally posted by 95dsmrsproj
clean head is called for as of now

its mine!!! dont worry about that!

Ok, I also have:
- autometer cobalt air/fuel gauge 2 1/16"
- new, unopened Clevite rod and main bearings
- 2 throttle bodies, 1 is bored/polished to 55mm. and needs a plate
- new rear crank seal
- new front waterpipe(in front of head)
- new lower water pipe and o-ring that goes into the water pump
- fiberglass passenger airbag cover(needs primed and painted)
- 2 BMW halo rings

What size are the bearings?? stock or other??

standard bearings..
- and I have a crank with polished journals...it's standard too.
- and a palm m500 with the sync cable

Update:
-Clean head is spoken for
-ECU is spoken for

Also have a transmission with around 100000 miles on it and 11" x 14" laminated frame and body measurement sheets

DUDE...i need a manual tranny REALLY REALY BAD. I'm gonna send you a pm too.

Originally posted by 95eclipse420A
DUDE...i need a manual tranny REALLY REALY BAD. I'm gonna send you a pm too.

Transmission is spoken for.

PM'ed about Fender and fender wheel cover both drivers side

Originally posted by dizzastic
PM'ed about Fender and fender wheel cover both drivers side

front bodyparts sold locally

hey i was wanduring how much you want for your AEM intake kit and if you have the door pannels i need the part of it that holds the window buttons both driver and passenger side please email me back im very interested

Originally posted by Blue95
hey i was wanduring how much you want for your AEM intake kit and if you have the door pannels i need the part of it that holds the window buttons both driver and passenger side please email me back im very interested

$80 shipped for the (red) AEM cold air. Sorry, but the door panels were for manual mirrors

Hey Bro i need a couple of things where in MD are you located? I need the clips that hold the shifter linkage to that bracket on the tranny, and the clip that holds the slave line to it's tranny mount. Plus if your close enough I may come take a look at what is left to see if I can use anything. How is the headliner? Also headlights fog or no fog? and how much for the skirts?

Originally posted by Kirby
Hey Bro i need a couple of things where in MD are you located? I need the clips that hold the shifter linkage to that bracket on the tranny, and the clip that holds the slave line to it's tranny mount. Plus if your close enough I may come take a look at what is left to see if I can use anything. How is the headliner? Also headlights fog or no fog? and how much for the skirts?

Hey Kirby...the car is in Timonium, MD 21093. Headliner is gone, headlights...driverside is fogged, and passenger side is clear, but the mounts were busted off and repaired by the previous owner. I couldn't sell it like that. I should have those clips you're talking about..I just have to look for them at work tomorrow. $50 for the sideskirts if you're picking them up. Feel free to come check out what I've got. PM me if you want directions.

would you happen to have the MAP sensor and IAT sensor? Haha I need those little pins that hold your carpet down where the back seat fold down. Hmm how bout EGR Solonoid? Oh oh how bout a exhuast manifold heatshield, one that isn't all cracked up.

oh oh yeah one more a fuel pressure regulator.

I want what ever body parts from the doors back that you have. Minus the hatch if possible. Just give me an idea about how much you would want for it. Where are you located?

Originally posted by BDTalon
I want what ever body parts from the doors back that you have. Minus the hatch if possible. Just give me an idea about how much you would want for it. Where are you located?

I'm in Timonium, MD 21093
2200 Greenspring Dr. is where the car's at.
You want the doors back? If you need the mirrors, I have them too. There are some door dings, but nothing major...and the antenna was shaved beautifully. The quarter glasses are gone. The rear bumper is excellent, taillights look brand new. The rear suspension has been removed completely. The roof is damaged, but repairable where it meets the front windshield....in case you might have needed it. You figure out the shipping arrangements. I can have it placed on a pallet or 2. I can cut the car in half if you want, or you can take the shell as is. We were in the process of chopping the roof 3-4" so the A pillars have been cut halfway up the front windshield. $400 for everything you requested. Let me know if you want it ASAP so we don't cut anymore.

Originally posted by HadesOmega
would you happen to have the MAP sensor and IAT sensor? Haha I need those little pins that hold your carpet down where the back seat fold down. Hmm how bout EGR Solonoid? Oh oh how bout a exhuast manifold heatshield, one that isn't all cracked up. oh oh yeah one more a fuel pressure regulator.

I have all of those if you need them. Make me an offer for the lot..and the heatshield is in awesome shape!

Originally posted by HadesOmega
would you happen to have the MAP sensor and IAT sensor? Haha I need those little pins that hold your carpet down where the back seat fold down. Hmm how bout EGR Solonoid? Oh oh how bout a exhuast manifold heatshield, one that isn't all cracked up. oh oh yeah one more a fuel pressure regulator.

Payment received, Thankyou. Your package will be shipped on Tuesday.

I would like your stock ECU please give me a call at 801-953-9744

Thanks, Nick

Originally posted by Nick5102
I would like your stock ECU please give me a call at 801-953-9744 Thanks, Nick

Sorry Nick, it was claimed a couple posts up. Thankyou though.

Paypal sent this afternoon for the cleaned head, you should have it tuesday when it clears!

Thanks anyways i wont be needing it. Hopefully i got back to you soon enough. I found another shell, In better condition!.. I may need tails but ill get back to you on that.

Originally posted by BDTalon
Thanks anyways i wont be needing it. Hopefully i got back to you soon enough. I found another shell, In better condition!.. I may need tails but ill get back to you on that.

Ok. Thanks for letting me know

Originally posted by eclipse982nrRST
Paypal sent this afternoon for the cleaned head, you should have it tuesday when it clears!

Thanks for the update, I'll let you know when it posts to the account.

Fuel line from the tank to the engine bay?

PM Sent

I figure since I cant stop fixing the damn thing, I'll just create more problems to work on. :) The stock pile has begun. Parts PArts PARts PARTs PARTS!!!
I'm a novice listen to what I say and make your own conclusion. If I'm wrong tell me and I will learn. Thanks be to the 2gnt Gods may they grant me turbo and fruits of the Earth. Amen.

PM Sent for some manual parts

hey if that ECU is not sold already I really really really need it my car is dead at the moment needing resurection I could paypal you tonight

Originally posted by Brandon005
hey if that ECU is not sold already I really really really need it my car is dead at the moment needing resurection I could paypal you tonight

yup, already spoken for. Thanks for the interest though.

what about the letters on the back that say eclipse. damn ricer debadged mine before i got it

Originally posted by racinfast002
what about the letters on the back that say eclipse. damn ricer debadged mine before i got it

I have the whole reflector with the "eclipse" lettering on it in awesome shape, but would prefer to sell as a set along with the two taillights. Make me an offer and we'll see!

-Block has been spoken for
I still have a ton of parts..I will put up a pricelist of what I'll take for whats left by Saturday if nothing else is requested. Thanks, Mark

i need the clutch master and slave cylinder and the hard lines that run from the master cylinder to the slave cylinder. Thanx

how much for the A/F gauge?..send me a PM

**Ebay intake w/ injen filter, 55mm TB, Thermal R&D NT Catback, F & R upper strut bars,
**Waiting to be installed: Hurricane GS lower tie bars, AFX UDP
**Next on the list- Tokico Illumina Shock/Spring kit

PM's sent
-air/fuel gauge is paid for and will be shipped tomorrow
-Hades parts have been shipped
-Vince's ECU arrived and fixed his car
-tranny/clutch/TOB will be going out tomorrow as long as the bastards come to pick it up
-still waiting on payment for manual conversion parts!
-still waiting on payment for the clean head!

I need the signal control switch. Have it?

Is that the one on the turn signal/wiper assembly?
If so, yes..I have it

turn signal and wiper switch are two totally different switches, on opposite sides of the steering column.

pm me if you want it

Looking for the highbeam relay located underneath the front driver side fender. It's a metal casing with plastic connector..about 1"x3/4" and held on the frame by 1-10mm bolt.

Also looking for a downpipe with no holes/cracks.

Let me know if you can hook me up. :)

I'll see about that relay, but the downpipe is beat.


I still have 2 heads, one of which is all cleaned up and ready for whatever you want to do to it $125 shipped for the clean one $100 shipped for the one that hasn't been tanked.
Here's the rest of what I've got and what I'll take for the parts.
Everything is in great condition or I wouldn't list it. Also, all prices include priority shipping, or another carrier for the big stuff.
$250 Block/bedplate
$125 Clean head, cams not inc.
$100 other head, cams not inc.
$30 valve cover
$40 ac compressor
$30 power steering pump
$40 alternator
$20 silver painted hvac vent with black inserts/buttons
$20 New "Maximum boost" by Corky Bell
$15 New rear main crank seal
$10 map sensor
$10 IAT sensor
$20 cam sensor/new gasket 5293196AA
$10 black dimmer switch
$10 cam magnet
$40 taillights 3 pieces
$80 TYC elegante black taillights
$70 AEM red cold air intake
$30 fiberglass airbag cover
$45 BRAND NEW standard clevite77 main and rod bearings
$10 palm m500 with sync cable
$25 silver painted ashtray/cupholder
$15 silver painted gauge surround
$25 BRAND NEW Mitsu MLS head gasket
$12 New valve cover gasket/sparkplug seals
$15 turn signal switch
$15 wiper switch
Thats the updated list for now..

I still have 2 heads, one of which is all cleaned up and ready for whatever you want to do to it $125 shipped for the clean one $100 shipped for the one that hasn't been tanked and glass beaded.
Here's the rest of what I've got and what I'll take for the parts.
Everything is in great condition or I wouldn't list it. Also, all prices include priority shipping, or another carrier for the big stuff.
$30 Gray glovebox
$250 Block/bedplate
$125 standard crank with polished journals
$125 Clean head, cams not inc.
$100 other head, cams not inc.
$40 good set of stock cams
$30 valve cover
$40 ac compressor
$30 power steering pump
$40 alternator
$20 silver painted hvac vent with black inserts/buttons
$20 New "Maximum boost" by Corky Bell
$15 New rear main crank seal
$10 IAT sensor
$20 cam sensor/new gasket 5293196AA
$10 black dimmer switch
$10 gray dimmer switch
$10 cam magnet
$70 AEM red cold air intake
$45 BRAND NEW standard clevite77 main bearings and rod bearings
$10 palm m500 with sync cable
$20 ashtray/cupholder...silver painted lids in a gray surround
$15 silver painted gauge surround
$15 turn signal switch
$15 wiper switch
$30 both manual mirrors, black
$25 pair of BMW OEM Z3 hood vents
$25 gauge cluster (2 avail.)both need new clear lenses $8 dealer part
Thats the updated list for now..

Hey Mark, do you have the stock front camber bolts? This Spyder has the Ingalls kit and I need the front stock pieces so it will pass inspection.

Thanks man.

Originally posted by Jeff_99gs
Hey Mark, do you have the stock front camber bolts? This Spyder has the Ingalls kit and I need the front stock pieces so it will pass inspection. Thanks man.

Hey Jeff...I'm sorry, but the front end is pretty stripped. If you're talking about the ones that attach the upper control arms to the body...I know they're gone. #MB892320 $28.60ea? That price sucks! Sorry I couldn't help you out bro. :( If you need anything else..and I have it...it's yours. There isn't alot left, and it's all about to go on ebay. I know Brown's junkyard had a couple talons in their lot...you might want to see about that for a last resort.

AEM CAI is spoken for...

I still have 2 heads, one of which is all cleaned up and ready for whatever you want to do to it $125 shipped for the clean one $100 shipped for the one that hasn't been tanked and glass beaded.
Here's the rest of what I've got and what I'll take for the parts.
Everything is in great condition or I wouldn't list it. Also, all prices include priority shipping, or another carrier for the big stuff.
$30 Gray glovebox
$125 standard crank with polished journals
$125 Clean head, cams not inc.
$100 other head, cams not inc.
$40 good set of stock cams
$30 valve cover
$40 ac compressor
$30 power steering pump
$40 alternator
$20 silver painted hvac vent with black inserts/buttons
$20 New "Maximum boost" by Corky Bell
$15 New rear main crank seal
$10 IAT sensor
$10 black dimmer switch
$10 cam magnet
$45 BRAND NEW standard clevite77 main bearings and rod bearings
$20 ashtray/cupholder...silver painted lids in a gray surround
$15 silver painted gauge surround
$15 turn signal switch
$15 wiper switch
$30 both manual mirrors, black
$25 pair of BMW OEM Z3 hood/fender vents
$25 gauge cluster
Thats the updated list for now..

Any luck with that headlight relay? :)

I'm sorry Todd, I forgot to get back to you on that one...but no, I didn't see anything where you said it is. The only thing under the fender was an airbag sensor. The car is gone now and I just have parts left. Sorry about that

Hi, could i get pics of the z3 fenders?

baseballod05@yahoo.com