2GNT.com Forums - Printer friendly page, topic ID #78678 -

78678, FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-17-05 09:10 AM

All Prices are OBO With NO Shipping, GI on the DVD Unit (might just use it), Have pics of almost everything

Pioneer AVH-P6600DVD In Dash DVD Player Touch Screen LCD/TFT - $975
Clear Tails (Not Altezzas)(All 3 Pieces) - $245
Clear Tails (Not ALtezzas)(Both Sides) - $215
NEW Melling Oil Pump - $100
Built Motor ShortBlock Painted Silver (JE Pistons 8.8:1, Crower Rods, Clevite77 Main & Rod Bearings, Hastings Pistons Rings, Bored .040, Knife Edged Nitride Treated crankshaft) - $1500 (NO SHIPPING)
NEW RC 440 cc Injectors - $245
NEW Crane HI-6DI2 CD Ignition (Howell:$479.95), Crane Map Sensor(Howell: $58.95), Crane Timing Retard Control (Howell:$123.95) (EVERYTHING WAS BOUGHT AT HOWELL) - $555
NEW Trans-Go Shift Kit - $45
Mopar A604 Reseal Kit - $100
AEM Cam Gears - $165
Custom Fiberglass Dash - $495 (NO SHIPPING)
Star Stage 1 Charge Pipe - $45
Blue StreetGlow Tubes - $145
Tein Basics Full Coil-Over System - $565
Sensei EVO Front Bumper (Needs Work) - $85 (NO SHIPPING)
NEW Ignited Blue Push Start Button - $55

OEM:

Head - $145
Intake Manifold (Upper & Lower) - $45
SRS System Control Unit - $85
Front Seat Belt - $30
Radiator Brackets - $15
Tan Pass. A Pillar - $15
Main Grey Hatch Panel - $40
Center Vent/Bezel/Switches - $25
97-99 OEM Rear Bumper - $165 OBO (NO SHIPPING)
Black Side Dash Vents - $15
Grey Lower Dash Panel (Pass. Side) - $25

78698, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by jdpilot, Aug-17-05 01:40 PM

I'll take the blue ignited starter. Email me

78729, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-17-05 06:35 PM

Originally posted by jdpilot
I'll take the blue ignited starter. Email me

Email Sent, LMK

78737, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by ajcfalcon, Aug-18-05 04:48 AM

pics of dvd unit please? coautosales@hotmail.com

78804, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-19-05 05:59 AM

I will try and get some pics for you, but like i said i might be using it, not sure yet.

78814, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by ajcfalcon, Aug-19-05 10:06 AM

yah thats cool, ive been looking at a pioneer DVD screen but i cant remember what the model number is.

78832, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by eclipse98, Aug-19-05 05:51 PM

if your willing to ship the block ill buy it off you and im also intrested in the cam gears, some pics would be great.

78838, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by Max-Eclipse, Aug-19-05 09:15 PM

Built Motor ShortBlock Painted Silver (JE Pistons 8.8:1, Crower Rods, Clevite77 Main & Rod Bearings, Hastings Pistons Rings, Bored .040, Knife Edged Nitride Treated crankshaft) - $1500 (NO SHIPPING)

Does (NO SHIPPING) mean local pick up only, or shipping is included..?

78840, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by eclipzGST, Aug-19-05 09:29 PM

Originally posted by Max-Eclipse
Built Motor ShortBlock Painted Silver (JE Pistons 8.8:1, Crower Rods, Clevite77 Main & Rod Bearings, Hastings Pistons Rings, Bored .040, Knife Edged Nitride Treated crankshaft) - $1500 (NO SHIPPING) Does (NO SHIPPING) mean local pick up only, or shipping is included..?

Since all the big pieces say (no shipping), I'd imagine he won't ship them.

78891, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-21-05 10:09 AM

Originally posted by ajcfalcon
yah thats cool, ive been looking at a pioneer DVD screen but i cant remember what the model number is.

Ya man I decided to put it in my car.....I have the AVH-P6600DVD 6.5" Touch Screen LCD/TFT

Originally posted by eclipse98
if your willing to ship the block ill buy it off you and im also intrested in the cam gears, some pics would be great.

Sorry man not looking to ship the block, I will post pics of the Cam Gears though...

Originally posted by eclipzGST
Originally posted by Max-Eclipse Built Motor ShortBlock Painted Silver (JE Pistons 8.8:1, Crower Rods, Clevite77 Main & Rod Bearings, Hastings Pistons Rings, Bored .040, Knife Edged Nitride Treated crankshaft) - $1500 (NO SHIPPING) Does (NO SHIPPING) mean local pick up only, or shipping is included..?
Since all the big pieces say (no shipping), I'd imagine he won't ship them.

Ya.....Not shipping the bigger things....

HERE ARE SOME PICS OF SOME STUFF....

78897, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by dougie2, Aug-21-05 01:26 PM

Will you sell the Crane ignition without the MAP sensort and TRC module? If so, how much for the Crane and AEM gears?

78990, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-22-05 10:06 PM

I dunno if i wanna do that or not....I guess u can make me an offer on just the Crane Ignition if you want and then we can see what we can do, Im just not sure if I can sell the map and retard seperate...

79063, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-24-05 08:28 AM

Someone wanted a pic of the head...and also i have a gamecube for sale as well....

79148, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-25-05 08:39 PM

3 Piece Clears - SOLD

79217, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by kain_99gs, Aug-26-05 09:59 PM

What is the price on your gamecube alone? Or were you looking to sell with all games/etc?

79223, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by Semperboost, Aug-27-05 07:25 AM

Man bro you've been trying to sell that built block since July, I'm surprised no one has bought it yet. That and those Teins should of been fast moving items. Can you PM some specs on the block (Miles, why it was removed and bored to .040, pics) If doesn't sell by October/ November I might get it. Thanks
Alvin

http://www.cardomain.com/id/96rst

79269, RE: FS: Pioneer DVD Unit, Clear Tails, Crane Ignition, Built Short Block, Teins, AEM Cam Gears, MORE!!
Posted by HipHop615, Aug-28-05 04:21 PM

Originally posted by kain_99gs
What is the price on your gamecube alone? Or were you looking to sell with all games/etc?

Im looking to sell it all together, but i might sell just the gamecube just depends on how much you were looking to spend for just the gamecube.

Originally posted by Semperboost
Man bro you've been trying to sell that built block since July, I'm surprised no one has bought it yet. That and those Teins should of been fast moving items. Can you PM some specs on the block (Miles, why it was removed and bored to .040, pics) If doesn't sell by October/ November I might get it. Thanks Alvin http://www.cardomain.com/id/96rst

PM Sent