My Girlfriend is selling her 1996 Dodge Avenger.
It is 4cyl. Engine . Has 104K miles on it.
Paint and Interior are Immaculate.
Timing Belt and Tensioner changed at 80K
Tranny and Torque Converter blew up at 75K - New Tranny and Torque Converter installed
Teal Exterior - Grey Interior
New Oxygen Sensors, Plugs changed, and Oil Changed every 3K
Runs Perfect
Selling because she graduated from Med School and bought new Car.
Will have pics up soon.
Everything is stock
Has 12 Disc Changer with Remote installed in Glove Box
$3750

Story on my Eclipse - I was in college modifying my Eclipse Engine Blew -Spun Bearing - Bought all new parts - Graduated - Got Job in PIttsburgh, Pa never went back to Indiana to Build - car and Brand New Parts have been sitting for a year in a garage collecting dust- Mom Calls and wants everything out ASAP -soo most parts are still in plastic Block has some surface rust - before I left it was honed, and decked I got as far as installing the bearings Main and Rod - New crank and Got the Oil Pump from Howell out of box and stuck it on. thats it.
now
parting out 95 Ecilpse GS at http://www.helicon.net/rvrabel,
New TopLine Kit still in Plastic - Block with Brand new oil pump just out of box - New crank - new bearings - Two Heads one acid dipped and cleaned, One stock - PT Cruiser Lifters still in Plastic - Gasket Kit in Plastic - New Mopar Oil Pan in Box - Altenator - starter - Projectors Black housing - G1 Altezza's - Custom Head Rests - Carbon Fiber Arm Rest - CF Bezel - Indiglo's - 99 Front End white - Stock Fog Lights from 99
much more - Make Offers

selling a 90 Talon TSI AWD 5spd, 2002 Eclipe Rims, KN air, Dejon Intake,MBC and Boost Gauge, Indiglo Gauges 144K - $2750

Email rayvrabel@yahoo.com
or call 724-910-9817
Cars are in Indiana, Pa - I'm In Pittsburgh, Pa 50 miles East

may be interested in fog lights and projector head lights, i'll pm u about them and maybe we can work out some pricing, thanks

PM sent.

Gabe

Ok where do I start, i'm getting like 15 emails a day, unreal..how many people need parts,

Block has Oil Pump installed, I got it from howell automotive, it is infact a Melling ($100) with improved passages $- note: This block has a the Crank installed with Clevite Main Bearings and Rod Bearings Pistons and Oil Pump installed, was Honed(Not bored) with new Piston Rings, Understand it has also has been sitting for 1 year (IN a Garage), which means it has SURFACE rust, no the block isn't ruined or damaged, this is easily removed, its like the rust that gets on a rotor overnight after it's been raining., But the Block has been stored in a Garage, so thats how i know its just surface rust from Moisture in the AIR and can be wiped off. Front Main and Rear Oil Seals have also been installed.

Stock head - I have two, both alot of people want, one is decked,acid dipped, stripped and looks like new, other has 79K on it, not decked, No prices on this yet, as people have been making offers on each..
Also have Stock Cams which have been polished on the Journals

I have ALOT of people asking about the Heads because some want the Entire head, with Stripped Valve Cover - Black Valve Cover - With the Cams, Cam Gears, Valves, and PT Crusier Lifters, plus the Valves have been swirl polished to remove the Carbon Build Up.

Head Gasket is part of the Top Line kit, and it is brand new, includes every Gasket for your car (minus whats installed on block), Piston Rings (installed), Front and Rear Oil Seal (Installed), Spark, Cam, Valve Cover, Head (this is not a MOPAR) but is MLS, Exhaust Intake, misc Rubber Seals, for Oil pickup etc.

I don't have the Timing Tenioner any more, I do however have a Timing belt Kit from Mopar that was $125 still in Plastic, TIming Belt - Pulleys never opened

TB was bored out to 57mm and Port matched to the Intake, the runners however are not BORED,just the port where it meets the TB, they were bolted down and ported together.

I spent over $1000 on parts and Services.. which doesn't include the Block which I had and the Head..

Hopefully this gives you more of a Clear picture, i will have pictures this weekend of Everything when i get home....

I have also received several offers on the Front Bumper (this has some stress cracks in the paint from getting to close to a sign) you'll see in the pics,
The Fogs are from a 99 very heavy duty, and the harness has been cut to match the two wires to my 95.

The projectors are Black housing There are NOT HALOS' or the double projector < they have one ION blue Projector beam with a Normal H3 or H4 High Beam Square, Clear Sides, and Clear Markers.

-Ray
Please send all emails to
rayvrabel@yahoo.com

UPDATE: Pictures of the TALON

http://spaces.msn.com/members/90TalonTSI

click Photo then the Button for Full Size.

or

http://spaces.msn.com/members/90TalonTSI/PersonalSpace.aspx?_c01_photoalbum=showdefault&_c=photoalbum

rayvrabel@yahoo.com
724-910-9817

Hey, I need some interior parts asap. I need (all in black) the steering column cover, cup holder/ash tray, and the instrument pannel. Let me know what you would want for all those parts and how quickly you can ship them out. Thanks

http://spaces.msn.com/members/90TalonTSI

click on Full Size button

I need a thermostat housing and crank pulley asap if you have one for sell let me know how much

update???

Gabe