Yes now I have prices....

I will try and get pics of things, Honestly I hate doing this but Im tired of draining all my money into this car and wanna stop while most of this stuff is still new. Everything is OBO but some things are more negotiable than others. Nothing includes shipping. More you buy the more you save.

NEW Vortech SFMU - $235
NEW ARP Head Studs - $110
NEW Melling Oil Pump - $100
Built Motor ShortBlock Painted Silver (JE Pistons 8.8:1, Crower Rods, Clevite77 Main & Rod Bearings, Hastings Pistons Rings, Bored .040, Knife Edged Nitride Treated crankshaft) - $1600
NEW RC 440 cc Injectors - $245
NEW Crane HI-6DI2 CD Ignition (Howell:$479.95), Crane Map Sensor(Howell: $58.95), Crane Timing Retard Control (Howell:$123.95) (EVERYTHING WAS BOUGHT AT HOWELL) - $555
NEW Screamon Demon Coil - $70
NEW Trans-Go Shift Kit - $45
Black SAFC II - $220
Mopar A604 Reseal Kit - $100
AEM Cam Gears - $165
Custom Fiberglass Dash - $495 (NO SHIPPING)
TopShop Fiberglass Headliner W/ Sunroof - $150
Star Stage 2 Turbo Kit W/ Greddy Type RS BOV - $2200
Star Stage 1 Charge Pipe - $45
Blue StreetGlow Tubes - $145
Tein Basics Full Coil-Over System - $590
Full Authentic Bomex Kit - $395 (NO SHIPPING)
Sensei EVO Front Bumper (Needs Work) - $85 (NO SHIPPING)
Greddy EVO Cat-Back W/ Apexi DP (4G63) - $425 OBO (NO SHIPPING)
NEW Ignited Blue Push Start Button - $55



OEM:

2 Complete OEM Heads (W/ Cams) - $145 Each
Intake Manifold (Upper & Lower) - $45
Throttle Body - $35
SRS System Control Unit - $85
Front Seat Belt - $30
Radiator Brackets - $15
Tan Pass. A Pillar - $15
Main Grey Hatch Panel - $40
Center Vent/Bezel/Switches - $25
97-99 Side Skirts W/ End Caps Painted White - $145
97-99 OEM Rear Bumper - $165 OBO (NO SHIPPING)
Down Pipe w/ Catalytic Converter - $45
Black Side Dash Vents - $15
Grey Lower Dash Panel (Pass. Side) - $25
Valve Cover - $40

how about $700 shipped for the crane ignition and 1 stock head?

Originally posted by eclipse982nrRST
how about $700 shipped for the crane ignition and 1 stock head?

PM Sent

I might need the stock CAT, but I need to know how fast you could get it here if I paid tomorrow (DP not needed I already have 2 of them)

how big is the cat back ? interested in the SD coil

i want the sfmu, is it like brand new never installed/complete with all disks and springs? callin dibs for now

grrrrrrrrrr.....you couldn't have posted the head studs last week or something? :P

Originally posted by brokenrodguy
how big is the cat back ? interested in the SD coil

I think its 3Inch let me get back to you on that, its an EVO2 from a 98 GST. LMK about the Coil.

Originally posted by cs82685
i want the sfmu, is it like brand new never installed/complete with all disks and springs? callin dibs for now

Yes its Brand Spankin New, Never Used, all springs/disks still in the plastic. LMK

Originally posted by micyek
grrrrrrrrrr.....you couldn't have posted the head studs last week or something? :P

LOL well I just decided to sell all of this stuff sorry =)

Here are some pics...

That BOV is part of the kit right? I couldnt buy it seperate :)

Money sent for sfmu

Black SAFC II - $220


shippd?????

oh and would you part out the star stage 2???? i need the dp and intercoolerpiping even the intercooler

still have the head studs? let me know! i want them. $100 shipped? Summit has them for $100+ shipping

Originally posted by donnyb373
Black SAFC II - $220 shippd?????

Ya Thats Fine, PM Sent

Originally posted by donnyb373
oh and would you part out the star stage 2???? i need the dp and intercoolerpiping even the intercooler

No Sorry I wanna sell all together.

Originally posted by CarbonFiberRST
still have the head studs? let me know! i want them. $100 shipped? Summit has them for $100+ shipping

Ya Thats Fine, PM Sent

Ok, I sent $115 cause I know I hate it when people always low ball my shit and I don't know what I was thinking... ARP HEADSTUDS = SOLD

EDIT: Please ship as soon as you can. I have everything else I need, I think... and thanks.

Hey just to let you know. Corey your SFMU has been sent out as well as your ARP Studs Sean. Thanks again

SFMU - SOLD
ARP Head Studs - SOLD
Full Bomex Body Kit - SOLD
SD Coil Pack - SOLD

out of curiosity you wouldn't happen to have purchased fittings and fuel lines for the sfmu?

Originally posted by cs82685
out of curiosity you wouldn't happen to have purchased fittings and fuel lines for the sfmu?

Not to bite hiphips thread, but if he doesn't have what you need, then let me know, I have -6an Stainless lines for underhood and aluminum lines for under the car. I have pics around here somewhere...let me know if he doesnt have any for you.

thanks i think i'm good now, i just found the sfmu diagram on the mods page and i'm just gonna buy those parts right from summit....free bump

Star Stage 2 Turbo Kit - SOLD

is this armonds block? pics of the pistons?

item received quickly and as described, point for you

I need the upper and lower intake mani... is the $45 for both or each? Also can you get me a pic of the dp w/cat? crazyeclipse@gmail.com

Thanks

Originally posted by cs82685
item received quickly and as described, point for you

Im gald to here it got there ok.

Originally posted by CrazyEclipse
I need the upper and lower intake mani... is the $45 for both or each? Also can you get me a pic of the dp w/cat? crazyeclipse@gmail.com Thanks

Ya its $45 for both, sorry dp is gone, PM Sent

still have the block and how many mile are on it?

Originally posted by Gsuperman
still have the block and how many mile are on it?

PM Sent

Bump

97-99 OEM Sides - SOLD
1 Complete Head - SOLD
TB - SOLD
VC - SOLD
TopShop Headliner - SOLD
Intake Manifold - Sale Pending

Do you still have the star stage 1 charge pipe?

Originally posted by BANME!TuNeR
Do you still have the star stage 1 charge pipe?

Yes I do, PM Sent