http://www.gopartstrader.com/cgi-bin/suite/classifieds/classifieds.cgi?request=detail&id=232574&category_id=112&sub_id=1067&variable_file=merchandise.variables&group=1&set=1&position=1&total_count=1701&website=default&prev_action=display_sub_list&session=42a639472c971a66


Complete 420a motor and tranny
Only has a little over 6,000 miles on it. Rebuilt back in November of 2004 and hasnt bruned a drop of oil since. Made the trip from Miami to Memphis in one peice.

Rebuilt becase of a spun bearing back in May of 2004.

Has new oversized clevite Bearings (mains&rods)
New seals & gasktets on complete motor
New Piston Rings
New Oil Pump
New Water pump
New Alternator
New piston and rod on cyl#1

Crankshaft was grinded and polished
Head was acidwashed and surface was shaved to insure flatness
Block was honed, acidwashed, and all freeze/oil gallery plugs replaced
The deck on the block was also shaved to insure flatness
Head was rebuilt with new valvestem seals

**Machine work done my Mesa Balancing in Miami, Florida**

Has EGR Blockoff kit
OBX 4-1 Ceramic Coated Headder
Ebay Cold-ait intake
Howell 30% Underdrive Pulley

Powersteering pump is on the block but has no belt

Trannsmission is automatic with about 70K miles on it. Filter and fluid were replaced during engine rebuild.

Alwaysed used 10w30 sythetic oil and Fram filters since rebuild and oil was changed at 500 miles since first start-up, changed again after 1,000 miles, then changed again after every 3,000 miles like normal.


A few sensors were damaged while puling the motor out of the car.

ECU included.


make offer. call my cellphone @ 1-901-292-4086 if yuo have any questons.


thank you

Price?

make offer

PS: I forgot to mention


The CAI and headder have dents in them from the accident. (yes, i totaled the car) But the dents arnt that bad.

Read Rules, Post Price

300 for the motor + shipping, I don't need the tranny, just throwing you a start point I guess but I'm serious also.

I'll give you 400 for the motor

Nick
97RS

i might wanna buy that motor.. is it complete?

Originally posted by ECLiPSE56
i might wanna buy that motor.. is it complete?

???? Can you not read????



everything is going at once. i cannot part out.

I already got an offer for $500 from a shop out of town that contacted me thu DSMtrader.

if anybody wants to beat that, come and pick it up becasue I'm tired of looking at this thing in my garage.

or if you can come by and pick it up yourself i'll cut ya a deal on the price. I really dont feel like fucking with shipping and handling.

hrmm...... fl is to far for me to pick up. So looks like I'm out.

i'll cut ya a deal on the price

i mean i'll cut a good ass deal.


i'll prob let it go for $200 if you come and pick it up yourself. I want this thing out of here, i leave to the navy June 27th and it has to go by then

u didnt get my e-mails or PM's?

Originally posted by Chamuko
u didnt get my e-mails or PM's?

mmmm

no,

Eclipse305DSM@yahoo.com


or just call me on my cell phone

1-901-292-4086

omg, i am sooo sorry guys



i live in Memphis, Tennessse now. 38028 is my zip code


i forgot to change my profile when i moved up here back in December.


fuck

Originally posted by DegreE
i'll cut ya a deal on the price i mean i'll cut a good ass deal. i'll prob let it go for $200 if you come and pick it up yourself. I want this thing out of here, i leave to the navy June 27th and it has to go by then

Awesome another Navy DEP on the forums!!! I am Navy DEP too scheduled to ship out Oct 25th. What are you going in for? I am in for Aviation Electronics. Don't want to throw your thread off but figured I would say whats up to a fellow DEP recruit.

Originally posted by EclipseTenzoR

Originally posted by DegreE i'll cut ya a deal on the price i mean i'll cut a good ass deal. i'll prob let it go for $200 if you come and pick it up yourself. I want this thing out of here, i leave to the navy June 27th and it has to go by then

Awesome another Navy DEP on the forums!!! I am Navy DEP too scheduled to ship out Oct 25th. What are you going in for? I am in for Aviation Electronics. Don't want to throw your thread off but figured I would say whats up to a fellow DEP recruit.

aviation mechanics

Very cool, you know where you are going to school

pensacola, fl.



/bump

If your willing to ship to the other side of the mufa country we could work out a dizeal...

I have shipped a motor before and know some of the ins n outs... let me know.


Nick
97RS

okay

what shipping company do you have in mind and how do i actually go about shipping it?

i dont have any crates or anything of that nature.

bizump

Hey man is this still for sale

justin