Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectParting out 96 Talon
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=7322
7322, Parting out 96 Talon
Posted by jefferino, Feb-18-03 07:31 AM
I am trying to help a friend out. His car keeps blowing a front axle so he has decided to part the whole thing out. The engine had a fresh tune up and the tranny shifts perfectly. It is a 96 Auto Talon. Let me know of anything you want and how much you are willing to give. Whoever is first to ask, will get it. If you want the whole car let me know too. The body is in pretty good shape. The body is in good shape, just not painted yet. Any panels that were damaged have been fixed or replaced and primered. Thanks for your time and the space on the board.
7324, RE: Parting out 96 Talon
Posted by a_miller_76, Feb-18-03 08:20 AM
96 Talon What? What options does it have, what body parts does it have (side skirts, type of wing)...does it have a rear wiper, what color is the interior...come on man, help us out ;)
7326, RE: Parting out 96 Talon
Posted by nosdeclipse, Feb-18-03 08:35 AM
i need a driver side outside door handle, preferrably if it is black, but i will take it anyway. if you have one e-mail me at ta_mike@hotmail.com
7327, RE: Parting out 96 Talon
Posted by RyaN95i4, Feb-18-03 08:43 AM
if is a 420a (sorry, didnt see mention of turbo or not), does it have the fuel rail w/ the test port on the end??? I dont want it if the test port is on the side of the rail, like where the injectors are, only if the test port is on the end. i need one for the 8 injector setup, thanks!
7328, RE: Parting out 96 Talon
Posted by Cereal5, Feb-18-03 08:48 AM
First dibs on all interior pieces (door panels, center console, dash) !!!! Let me know ASAP. Thanks
7329, RE: Parting out 96 Talon
Posted by slacker911, Feb-18-03 08:51 AM
is it obd1 or obd2 if its 2 and you want to go through the hassel I need the entire engine wiring from the ecu to every other part. I want to try something.
7334, RE: Parting out 96 Talon
Posted by ghostshellx, Feb-18-03 09:46 AM
if its non turbo i'll take the vale cover
7337, RE: Parting out 96 Talon
Posted by farmdogg55, Feb-18-03 09:51 AM
if it has side skirts, i'll buy them. also need the fenders and the tail lights.
7338, RE: Parting out 96 Talon
Posted by Kirby, Feb-18-03 09:54 AM
I need the fuel line fitting that plugs into the fuel rail. It's a little fitting that pushes into the fuel rail and then there are 2 screws that hold it to the rail. I also need this for the 8 injector setup.
7339, RE: Parting out 96 Talon
Posted by 1FastEclipse, Feb-18-03 09:59 AM
I'll take the intake manifold if it is non-turbo. Let me know ASAP
7347, RE: Parting out 96 Talon
Posted by BuckNutty, Feb-18-03 11:03 AM
EDIT: My bad, hehe
7348, RE: Parting out 96 Talon
Posted by raul, Feb-18-03 11:47 AM
I need the oil pan. Is it in good shape? No dings or dents, like mine?
7357, RE: Parting out 96 Talon
Posted by klipzracer, Feb-18-03 01:56 PM
TURBO OR NON-TURBO?!?!?!?!?!?! x(
7365, RE: Parting out 96 Talon
Posted by jefferino, Feb-18-03 03:04 PM
>TURBO OR NON-TURBO?!?!?!?!?!?! x(

It is a 96 talon es NON TURBO. I will get all of the specs on everything for everyone by tomorrow night, my friend is working all night. I appreciate all the replies and I look forward to working with you all. Thanks!
7373, RE: Parting out 96 Talon
Posted by Remy, Feb-18-03 05:05 PM
I'll need a front upper damper unit. Its the top part of the front strut.



baby jasiah at 2 weeks old !
7385, RE: Parting out 96 Talon
Posted by Raven457, Feb-18-03 07:19 PM
I need the rear trunk cargo light



7413, RE: Parting out 96 Talon
Posted by mike_d, Feb-19-03 06:38 AM
I need the wire harness's that connect to the power window switches (both sides) and the harness's that connect to the fog lights. I also nees the IAC and TPS sensors (they are the two that are attached to the throttle body). Let me know at mikeduarte1@yahoo.ca
7457, RE: Parting out 96 Talon
Posted by Layton141, Feb-19-03 02:01 PM
I Need a starter asap!! Email me if you have one!

Thanks,
Lee


1995 Eclipse GS - Urethane Blitz Kit, VIS CF Invader hood, CF Wing, CF TYC Euro lights, Kamikaze Header, Dual Exhaust, 97-99 headlights, Nitrous Wet Kit, (2) Alpine Type R
7458, RE: Parting out 96 Talon
Posted by Layton141, Feb-19-03 02:02 PM
OOPS.....My Email addy is Layton141@aol.com


1995 Eclipse GS - Urethane Blitz Kit, VIS CF Invader hood, CF Wing, CF TYC Euro lights, Kamikaze Header, Dual Exhaust, 97-99 headlights, Nitrous Wet Kit, (2) Alpine Type R
7471, RE: Parting out 96 Talon
Posted by Luzahan, Feb-19-03 04:27 PM
I need the driver's side wheel well. Or just the front bottom part I can send you a picture if needed. Will this fit on a 98 eclipse?
7508, RE: Parting out 96 Talon
Posted by derek, Feb-20-03 03:22 AM
I don't know the exact term, but I'm looking for the black surround for the guage cluster (it's the one outside of the glass). and/or the plastic cover around the steering column. I'll get for $20. Let me know.
-derek

email me direct: electroverride@hotmail.com
7614, RE: Parting out 96 Talon
Posted by wickedtalon, Feb-21-03 02:39 PM
I'd be interested in knowing a little more about the entire engine.. or whats left of it so far. miles, etc.
7618, RE: Parting out 96 Talon
Posted by DR1665, Feb-21-03 05:42 PM
I'd be interested in the headlights if they're in good condition. email me with a price - we'll talk.
docsixteen@yahoo.com
:thumbsup
7646, RE: Parting out 96 Talon
Posted by BuckNutty, Feb-22-03 02:40 AM
How's about the cruise control switch (the whole surrounding piece too and the foglight switch if it has them). And perhapse teh drivers side power window controller? PM me or e-mail me \/
7738, RE: Parting out 96 Talon
Posted by sademenace, Feb-23-03 06:48 AM
how about just about every metal bracket in the engine bay?? reach me via e-mail sademenace@hotmail.com
hmmmmmmm...... kustom

7775, RE: Parting out 96 Talon
Posted by cool_g_83, Feb-23-03 06:51 PM
I'll take the ashtray...email me cool_g_83@hotmail.com