I cant say for sure if its for sale yet or not, I have to doublecheck to make sure the turbo is not blown. My motor went downhill, and the car is in the shop now to be checked out. The kit is a custom design, but uses the Hahn manifold and turbo combination. The kit would include the following:

-Hahn Racecraft Manifold, 10cm Flange
-Hahn Racecraft Super16g TD05 Turbocharger, internally gated @ 7psi
-Holeshot Performance Custom Mandrel Bent 2.5" Downpipe
-Holeshot Performance Intake Pipe w/ K&N filter
-Upper/Lower Intercooler Pipes (Red), 2G DSM SMIC
-Ford Racing 440cc injectors
-Aeromotive Adjustable FPR
-Walbro 255lph High-Pressure fuel pump
-Missing Link Fuel Cut Defender
-Greddy E-Manage with all harnesses and advanced software
-MSD DIS-2 Capacitive Discharge Ignition
-Screamin Demon Coil Pack
-MSD 8.5mm Superconductor Spark Plug Wires (Red)
-Stock oil pan with drain fitting
-Silicone oil drain line
-Stainless Steel oil feed line
-Hard -6AN fuel return line
-All fittings, connectors, and everything.
-Gauge cluster bezel for gauges
-Autometer Boost and Autometer A/F Gauges
-HKS Turbo Timer

I probably forgot a few more things. In all, this would be the entire kit (every piece) removed from my car. I have to go over the entire car and see what else is remaining and post it up here. As for the condition of the kit, its been on my car for about 2 years and its seen about 12000 miles. The car is in Buffalo, and was not driven in the winter. Anyone who is local can come and check out the kit. As soon as the car gets back from the shop, I will take pictures of everything I can and post it up. I am not expressly looking to split the kit up.

As a disclaimer, this is a custom kit. Its in the car, it works, but it may require some additional labor to install in YOUR car. The kit was based on my own design, but all initial labor was performed by Holeshot Performance of North Babylon, NY. Other maintanance/labor performed by Hybrid Connections in Buffalo. All custom piping (excluding IC piping) and oil/fuel line work was performed by Holeshot Performance.

Not sure on the price yet, but if anyone is seriously interested please do not hesitate to contact me. If you have any questions, please email neovb@neovb.com. You can also reach me on AIM at NeoVB. If you need a phone number to reach me at please email me first. Thanks!

If you decide to part it, I want the 440s and the e-Manage!

You have mail.

if you part it out how about the manifold?? shoot me a pm

I'm interested in the whole thing. PM/IM me and we can discuss the price.

thanks

You have mail.

got cash dont need the e mange or msd wires send email to astar1222@hotmail.com with price