NX Wet Kit, bought used, never was able to use it. Comes with everything needed EXCEPT bottle brackets. You can get them easily at Kragen for $30. NOS WOT switch also included. $325 for the kit obo. Can't part out.



Internal Nitrous Pressure gauge. $30



97-99 Rear Bumper. Red. Lots of scratches. Really needs to be repaired. $50.





Cracked EVO Sensei Bumper. $75



Stock black hood. Some paint chips. $100



97-99 Headlights. Passenger side looks ok. Driver side has condensation and some scratches. Comes with low beam Sylvania Silverstars. $120






That's about it. I prefer local pickup in SoCal, but if I have to ship, YOU pay for shipping. Oh yeah, every price is negotiable. Thanks for looking.

you wouldn't happen to have the bottle fitting also for that n2o gauge would you?

Nitrous pressure Gauge sold.

Where is the cracks on the front bumper? I'm assuming its fiberglass and easily fixable. Can you ship through Greyhound? Let me know.

MiztahfooLish...
'95 RS (16.72 @ 84 mph) *wheel hop sucks!* 97-99 front/rear end conversion,
Autometer tach, shift light, oil pressure, & air/fuel ratio gauges, Accel 8mm wires,
K&N cold air intake, 60MM throttle body, ported and polished intake manifold,
OBX-R 4 to 1 header, Greddy EVO 60MM catback exhaust system, 2.5" test pipe,
Energy Suspension urethane motor mount inserts & shifter bushings, short shifter,
Ishihara-Johnson crank scraper, Dropzone lowering springs, front and rear strut tower braces,
Powerslot brake rotors, 17"x7.5" Rota Subzero wheels with Kumho Ecsta tires,

Yeah, its fiberglass and fixable. The cracks on the bumper are located in the same locations as seen in this pic...



Sorry for borrowing your pic Todd. Thanks.

I'll take actual pics of the bumper tomorrow. Yeah, I've shipped Greyhound. I take paypal too.

Bump. Sale pending for the headlights.

Yeah, that would be nice to see the actual pics. Give me a total price for the front bumper including shipping and how soon can you ship it if I pay no later this weekend. Thanks.

MiztahfooLish...
'95 RS (16.72 @ 84 mph) *wheel hop sucks!* 97-99 front/rear end conversion,
Autometer tach, shift light, oil pressure, & air/fuel ratio gauges, Accel 8mm wires,
K&N cold air intake, 60MM throttle body, ported and polished intake manifold,
OBX-R 4 to 1 header, Greddy EVO 60MM catback exhaust system, 2.5" test pipe,
Energy Suspension urethane motor mount inserts & shifter bushings, short shifter,
Ishihara-Johnson crank scraper, Dropzone lowering springs, front and rear strut tower braces,
Powerslot brake rotors, 17"x7.5" Rota Subzero wheels with Kumho Ecsta tires,

Bump. Rear bumper sale pending.

just a side question, but how much did it cost you to ship a bumper greyhound?

Originally posted by turbo8u
just a side question, but how much did it cost you to ship a bumper greyhound?

it cost hiphop 65 to send me mine from cali to nj.

Originally posted by turbo8u
just a side question, but how much did it cost you to ship a bumper greyhound?

Cost me 55 to ship to AZ.

why were you unable to use the NX kit?
and check shipping on it to 21921 or 19713 (whichever is cheaper)

I got lazy installing it. Plus a lot of things scared me off. First, I didn't have the money to do a rebuild just in case I blow my engine. I know its been said that running a 75 shot would be safe. But some people blew up their motors with just a 50 shot. I didn't wanna take the risk, especially if my motor has 132K miles on it already. I also didn't wanna drill into my cold air intake. Hehehe. Aight, I'll check shipping for the NX kit.

Originally posted by MiztahfooLish
Yeah, that would be nice to see the actual pics. Give me a total price for the front bumper including shipping and how soon can you ship it if I pay no later this weekend. Thanks.

You forgot to reply to my post?

MiztahfooLish...
'95 RS (16.72 @ 84 mph) *wheel hop sucks!* 97-99 front/rear end conversion,
Autometer tach, shift light, oil pressure, & air/fuel ratio gauges, Accel 8mm wires,
K&N cold air intake, 60MM throttle body, ported and polished intake manifold,
OBX-R 4 to 1 header, Greddy EVO 60MM catback exhaust system, 2.5" test pipe,
Energy Suspension urethane motor mount inserts & shifter bushings, short shifter,
Ishihara-Johnson crank scraper, Dropzone lowering springs, front and rear strut tower braces,
Powerslot brake rotors, 17"x7.5" Rota Subzero wheels with Kumho Ecsta tires,

Originally posted by MiztahfooLish

Originally posted by MiztahfooLish Yeah, that would be nice to see the actual pics. Give me a total price for the front bumper including shipping and how soon can you ship it if I pay no later this weekend. Thanks.

You forgot to reply to my post?

Oh hey. Sorry, I got home pretty late and it was too dark already to take pics. I'll try to see if I can take pics tonight. I'll try to post them ASAP. Thanks for checking.

Here are the pics of the front bumper where its damaged:

you werent joking when you said they were cracked in the same exact places lol.



Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

GROUP BUY OEM CF Hoods

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=49&topic_id=3652&mode=full

Parts 4 Sale:
Apexi N1 Full-CatBack, AEM V2 CAI, Eclipse MP3 Player, Sony 10 Disc CD Changer, Red OEM Hood, LOTS of StreeGlow Products, SFMU, EVO Front Bumper (Perfect Fitment but needs to be fixed), Skunk2 Coil-Overs W/ KYB AGX Shocks, NEW Light Grey Racing Seats, Blitz Side Skirts, Authentic Bomex Front, Sides & Rear, MTX Tranny, Turbo Kit (Turbonetics T4 Turbo, Turbonetics Delta Mark II Wastegate, Turbo Manifold, Vortech FMU, & Turbo XS RFL BOV)

Parts I Want/Need: Polished/Chromed VC, Black Door Sills, Levoc Auto Shifter, All Trunk Panels, All Hatch Panels, Seat Belts Covers (All 4 Caps & 2 Rear Pieces that slide), Kick Panels, Handle On Pass. A Pillar

Haha, yeah Todd, I wasn't joking. Exact same place.

you have to get back to my pm still too

Replied to ur pm.

Headlights are sold btw.

and me?

Arrrrgh, hahaha!!! I'm getting confused now. Yes yes, uh, you wanted shipping quote for the NX kit right? I still need to look for a decent box for the bottle. I'll get back to ya within this week. Thanks for waiting! :P