OK here goes I have several parts for sale I have pic on some. I can send them if needed. all parts are new some where installed but car was never finished so they didn't see any run time.

1)unorthodox racing clutch 6 puck unsprung hub with light weight flywheel.
$400 obo
2)Drive shaft shop stage 4 axles with ABS ring
$200 obo
3)Gauge works instrument cluster pod (goes around speedometer) with oil and water temp gauges installed.( auto meter Z series gauges)
$100 obo
4)gauge works left pillar 2 pod included is the actual pillar from the car so you don't have to drill yours and oil pressure gauge. (auto meter Z series)
$60 obo
5) crane ignition system with OBDII box, ignition wires and factory coil. (includes coil plug so you don't have to cut yours)
$150 obo
6) crane 0018 cams
$150 obo
7) 2.4 short block with ARP main studs, new bearings, eagle rods (stock ratio), weisco pistons (10.5:1)Flat top, SRT4 water pump,SRT4 oil pump (have to modify oil pan for remote oil filter mounting)only thing needed done is to line hone mains for bearing clearance. crank is in excellent shape and cylinders are already honed for pistons
make an offer
8)unorthodox racing crank pulley (only run alternator) pulley is used but I have brand new snout hub for it.
$40 obo
9)unorthodox racing oil cap
$20 obo
10) 5 speed trans with quaif LSD installed
$700 obo

items will have freight added no exceptions unless item is picked up local
email or instant message me for pics and info

here are some pics of what I have

what color is the oil cap? pics?

polished

That trans with quaife is a helluva deal...wish I woulda waited a bit longer to buy my mtx...argh.


Gotta love winter

You noted that the DSS stage 4 axles come with ABS rings. Can these axles be used on a car without ABS? I'm not too familiar with "ABS rings". If they'll work on a non-ABS car, then I'll take them and consider these sold. Let me know. Thanks!

yes they will work. my car actually is without ABS and they bolt up fine. all the ring is for is to pick up the magnetic trigger for the ABS. PM me with your info and I will get you a ship quote.

check your pm's

I'll Take the crank pully and the oil cap for $60.

What part of NC are you located?

Originally posted by ScreaminE
What part of NC are you located?

Lexington 15 min from winston-salem down hwy 150

PM sent.

1)unorthodox racing clutch 6 puck unsprung hub with light weight flywheel.
$400 obo
2)Drive shaft shop stage 4 axles with ABS ring
$200 obo
3)Gauge works instrument cluster pod (goes around speedometer) with oil and water temp gauges installed.( auto meter Z series gauges)
$100 obo
4)gauge works left pillar 2 pod included is the actual pillar from the car so you don't have to drill yours and oil pressure gauge. (auto meter Z series)
$60 obo
5) crane ignition system with OBDII box, ignition wires and factory coil. (includes coil plug so you don't have to cut yours)
$150 obo
6) crane 0018 cams SOLD SOLD

7) 2.4 short block with ARP main studs, new bearings, eagle rods (stock ratio), weisco pistons (10.5:1)Flat top, SRT4 water pump,SRT4 oil pump (have to modify oil pan for remote oil filter mounting)only thing needed done is to line hone mains for bearing clearance. crank is in excellent shape and cylinders are already honed for pistons
make an offer
8)unorthodox racing crank pulley (only run alternator) pulley is used but I have brand new snout hub for it.
$40 obo
9)unorthodox racing oil cap
$20 obo
10) 5 speed trans with quaif LSD installed
$700 obo

do you know the part number for the 2.4L mainstuds? my buddy is rebuilding his srt4, and needs them

Got your PM back... what is you PayPal and e-mail address?

Originally posted by SILVERNT
do you know the part number for the 2.4L mainstuds? my buddy is rebuilding his srt4, and needs them

Do you mean the main cap bolts in the block? Same as the Bed plate/gurdle bolts There are no studs, but there are M8 and M11 bolts there.

Edit: 8x1.25 and 12x1.50 I think. :shrug

If the axles dont go I am interested. I currently have stage 2's

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com

still up for grabs

Why are they still up for grabs? I'll pay and send you that label as soon as you give me your PayPal address.

sorry thought I got all info to you ill pm you now

I will get you some pics and send them to you tonight.

E-mail and PM sent on axles and tranny...

I just sent the payment for DSS Stage 4 Axles. SOLD.

Originally posted by dougie2
I just sent the payment for DSS Stage 4 Axles. SOLD.

It's cool dougie I already have stage 3's anyway. I only responded cause he said they were still up for grabs... With your power levels your going to need them. I don't know that I'll ever outrun those stage 3's...

BTW dibbs on the tranny...LOL

tranny still up for grabs? If so just let me know on how much to ship to 49061. Otherwise ill drive there to get it.

I'm waiting for a response from the seller on the tranny. I have the cash in hand and am waiting on the details...

damn u. lol

PM sent for UDP

1)unorthodox racing clutch 6 puck unsprung hub with light weight flywheel.
$400 obo

2)Drive shaft shop stage 4 axles with ABS ring SOLD SOLD :thumbsup

3)Gauge works instrument cluster pod SOLD SOLD :thumbsup

still avalable are the oil and water temp gauges (auto meter Z series gauges)

4)gauge works left pillar 2 pod included is the actual pillar from the car so you don't have to drill yours and oil pressure gauge. (auto meter Z series)
$60 obo

5) crane ignition system with OBDII box, ignition wires and factory coil. (includes coil plug so you don't have to cut yours)
$150 obo

6) crane 0018 cams SOLD SOLD :thumbsup

7) 2.4 short block with ARP main studs, new bearings, eagle rods (stock ratio), weisco pistons (10.5:1)Flat top, SRT4 water pump,SRT4 oil pump (have to modify oil pan for remote oil filter mounting)only thing needed done is to line hone mains for bearing clearance. crank is in excellent shape and cylinders are already honed for pistons
make an offer

8)unorthodox racing crank pulley (only run alternator) pulley is used but I have brand new snout hub for it.
$40 obo

9)unorthodox racing oil cap
$20 obo

10) 5 speed trans with quaif LSD installed
$700 obo
still up for grabs

I give up the dibbs fellas have at it... Corbin if your looking get in here...

1)unorthodox racing clutch 6 puck unsprung hub with light weight flywheel.
$400 obo

2)Drive shaft shop stage 4 axles with ABS ring SOLD SOLD :thumbsup

3)Gauge works instrument cluster pod SOLD SOLD :thumbsup

still avalable are the oil and water temp gauges (auto meter Z series gauges)

4)gauge works left pillar 2 pod included is the actual pillar from the car so you don't have to drill yours and oil pressure gauge. (auto meter Z series)
$60 obo

5) crane ignition system with OBDII box, ignition wires and factory coil. (includes coil plug so you don't have to cut yours)
$150 obo

6) crane 0018 cams SOLD SOLD :thumbsup

7) 2.4 short block with ARP main studs, new bearings, eagle rods (stock ratio), weisco pistons (10.5:1)Flat top, SRT4 water pump,SRT4 oil pump (have to modify oil pan for remote oil filter mounting)only thing needed done is to line hone mains for bearing clearance. crank is in excellent shape and cylinders are already honed for pistons
make an offer

8)unorthodox racing crank pulley (only run alternator) pulley is used but I have brand new snout hub for it.
$40 obo

9)unorthodox racing oil cap
$20 obo

10) 5 speed trans with quaif LSD installed SOLD SOLD :thumbsup

1)unorthodox racing clutch 6 puck unsprung hub with light weight Flywheel. SOLD SOLD :thumbsup


2)Drive shaft shop stage 4 axles with ABS ring SOLD SOLD :thumbsup

3)Gauge works instrument cluster pod SOLD SOLD :thumbsup

still avalable are the oil and water temp gauges (auto meter Z series gauges)

4)gauge works left pillar 2 pod included is the actual pillar from the car so you don't have to drill yours and oil pressure gauge. (auto meter Z series)
$60 obo

5) crane ignition system with OBDII box, ignition wires and factory coil. (includes coil plug so you don't have to cut yours)
$150 obo

6) crane 0018 cams SOLD SOLD :thumbsup

7) 2.4 short block with ARP main studs, new bearings, eagle rods (stock ratio), weisco pistons (10.5:1)Flat top, SRT4 water pump,SRT4 oil pump (have to modify oil pan for remote oil filter mounting)only thing needed done is to line hone mains for bearing clearance. crank is in excellent shape and cylinders are already honed for pistons
make an offer

8)unorthodox racing crank pulley SOLD SOLD :thumbsup

9)unorthodox racing oil cap
$20 obo

10) 5 speed trans with quaif LSD installed SOLD SOLD :thumbsup