*Ignore the Arp Head Studs. All of the parts are new and un-used. I want 180 + shipping or picked up.

Timing Belt - 4667611
Timing Pulley - 4777394
T Bracket - 4777393
Tensioner - 4667283
Water Pump - 4667660
Water Seal - 4667663



The block comes equipped with oil pump, oil pickup, knife edged nitride treated crankshaft, ARP beadplate studs, Clevite77 main and rod bearings, Crower rods, JE pistons with Hastings piston rings with a ring gap of .015 top and .021 middle. Piston compression is 8.8:1. seals and oil pump have about less than 8K miles on them. holds perfect compression (185 across the board with crane #18 cams). balanced to spin up to whatever rpm.......seriously.the block is bored .040 over. block is already broken in. bolt up and boost/juice away. comes with oil pan with oil return drain for turbo(HRC kit). I want 650.00 picked up in SO-CAL only! I'm selling it cheap because i gave up my project and i need the room.

Closer pics of the pistons? Looks like they were getting hot near the intakes.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com

Btw this was never installed on my car. It was Armond's block.

Are the pistons pitted at all? If they are I would bet that you have a stuck ring or two.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com

Ill take the timing parts for 190 shipped let me now

Please define "pitted"

"Do they have pits in them."

Like... #3 there looks like it ate a sparkplug electrode.

yep your right, Armond mentioned about the sparkplug going through his head.

Timing Belt parts sold.

Timing belt parts sold yet? Pm me if not

Damn...I would want to buy that, but just worried bout it not running or running right. BTW How'd you get those #s when the block hasn't been assembled? Thanks

Alvin

hmm, i'm on the edge of my seat on telling you, I will pick this up now!! but i dont know shit about engine blocks and "pitting" Id have to know fors SURE the block is 100%

Originally posted by pfmicks
Timing belt parts sold yet? Pm me if not

?

The Timing Belt parts have been sold.

Well i'm lowering the price of the block to 400. So far i have someone interested. The price alone should be worth it for spare parts. I got the numbers off Armond when he still had the block. I used the same text he used when he was selling it here. Armond was an old school member here. I've rotated the crank and sprayed it down with wd 40 for months, and i'm getting tired of having to maintain it.

If i can't sell it i'm going to junk this hunk of metal.

Originally posted by Clay
If i can't sell it i'm going to junk this hunk of FORGED 420A SEXINESS

how...could you....

dude, keep for a few more months, and ill buy it from ya for sure. dont junk it. I just have a few more bills to pay, and i'll be on it.

i am from monterey but i am in oklahoma shipping that what i want to hear SHIPPING

PM Sent



Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

GROUP BUY OEM CF Hoods

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=49&topic_id=3652&mode=full

Parts 4 Sale:
Apexi N1 Full-CatBack, AEM V2 CAI, Eclipse MP3 Player, Sony 10 Disc CD Changer, Red OEM Hood, LOTS of StreeGlow Products, SFMU, EVO Front Bumper (Perfect Fitment but needs to be fixed), Skunk2 Coil-Overs W/ KYB AGX Shocks, NEW Light Grey Racing Seats, Blitz Side Skirts, Authentic Bomex Front, Sides & Rear, MTX Tranny, Turbo Kit (Turbonetics T4 Turbo, Turbonetics Delta Mark II Wastegate, Turbo Manifold, Vortech FMU, & Turbo XS RFL BOV)

Parts I Want/Need: Polished/Chromed VC, Black Door Sills, Levoc Auto Shifter, All Trunk Panels, All Hatch Panels, Seat Belts Covers (All 4 Caps & 2 Rear Pieces that slide), Kick Panels, Handle On Pass. A Pillar

Did the timing parts deal fall through? If so, I'll take everything!

joseph23w@hotmail.com

Block is sold.