I'm going to be parting out a 97 Avenger 5 speed that I just picked up.
I can have pics up later, but basically this is a car that was in a wreck, but has a running 420A and 5 speed.
Every part of the car is available except the rear brakes which I will be using.

Some prices are:

420A - running, aprox 90k miles. - $500 + shipping.
NV-T350 5-speed - $400 shipped.

Post for any other parts that you need.
Motor and tranny are still in car right now and will need to be pulled next week.

Pics:

I want the passenger side interior door panel.

Originally posted by DarkOne
I want the passenger side interior door panel.

You would have to pick one of things I wanted...lol.
I was going to use the door panels and do a power conversion... but I cna get aother set. ;)

What are they worth Dino?

Just tell me what you wnana pay and it's yours.

I might need just the block. Can you sell that by itself?

Originally posted by Jeff_99gs
I might need just the block. Can you sell that by itself?

I'd rather sell the complete motor as its a good motor...

I want and need a 5 speed conversion (tranny,master cylinder, slave cylinder, ecu,shifter, linkage, etc), including the avenger center console. You're 200 miles away, wonder how much shipping would be or if by the grace of god you could drop it off.



WHO WANTS TO HELP ME INSTALL IT?!?! :)

I need the drivers side rubber swivel mount that holds the muffler and the two 12mm bolts that holds that to the car and the muffler.

If I can't find a good block around my area I might buy the whole motor. I just have no idea how I would transport it.

well jeff, is elkton within range of you picking it up?

I could get the tranny stuff and the block at the same time, I could prolly even drive the block down to you, if I can get my moms pick up truck, I would want some gas money and what not.

Hell I'll put my 2G on the trailor and you can help me install the 5 speed swap and Id wave the gas money fee ;)




Rockville is just over an hour away from me, I think.

damn i need a motor for my poor car...

Originally posted by Jeff_99gs
If I can't find a good block around my area I might buy the whole motor. I just have no idea how I would transport it.

Jeff,

Where abouts in MD are you?

If you can't pick the motor up I could deliver it for a small fee.
If you want the motor payment can be sent to black12secta@yahoo.com if using paypal.

Let me know.

Lee.

Originally posted by Malenko
I want and need a 5 speed conversion (tranny,master cylinder, slave cylinder, ecu,shifter, linkage, etc), including the avenger center console. You're 200 miles away, wonder how much shipping would be or if by the grace of god you could drop it off. WHO WANTS TO HELP ME INSTALL IT?!?! :)

Hey,

I can do you the 5 speed conversion that you want for $500 for everything. I could even consider delivering it for you yes.

Payment can be made by paypal to black12secta@yahoo.com

Give me your Zip code, and I'll see how far you are, and see what I can work out. Delivery would be an extra charge of course.

Lee.

Top center vents.

I need the injector harness, and possibly the leather steering wheel if its in good shape.

PM sent.

Thanks
Jon

need IAC motor, wiper relay and coolant overflow tank

let me know

would the motor mounts be the same on that and my 97 m/t eclipse??? i figure since it's the same engine and tranny? what do you guys say? if so i need the rear driverside for the tranny and the metal bracket for it, and the driver side under the battery.

Originally posted by Eclipse97
need IAC motor, wiper relay and coolant overflow tank let me know

I have all of that.

How's $30 shipped for everything sound?

I'll take the upstream O2 sensor from header. Do you know if it works good or not. Who cares if it works better than mine it'll be all good. How much do you want shipped to 70508. Thanks.

Originally posted by MrSlick
Hey, I can do you the 5 speed conversion that you want for $500 for everything. I could even consider delivering it for you yes. Payment can be made by paypal to black12secta@yahoo.com Give me your Zip code, and I'll see how far you are, and see what I can work out. Delivery would be an extra charge of course. Lee.

zip is 21921, thing is I need some help installing it. My ATX is drivable....just really fucxkin noisy, so I could drive up to your place if you can help me drop it in, Id toss some extra money your way for labor of course.

and then I could pay you cash on the barrel and save any paypal fees.

Originally posted by Malenko

Originally posted by MrSlick Hey, I can do you the 5 speed conversion that you want for $500 for everything. I could even consider delivering it for you yes. Payment can be made by paypal to black12secta@yahoo.com Give me your Zip code, and I'll see how far you are, and see what I can work out. Delivery would be an extra charge of course. Lee.

zip is 21921, thing is I need some help installing it. My ATX is drivable....just really fucxkin noisy, so I could drive up to your place if you can help me drop it in, Id toss some extra money your way for labor of course. and then I could pay you cash on the barrel and save any paypal fees.

That would be a big job... changing the tranny alone is enough work without trying to do the conversion at the same time... It would be better to do the actual job where you live...

Originally posted by MrSlick
That would be a big job... changing the tranny alone is enough work without trying to do the conversion at the same time... It would be better to do the actual job where you live...

yeah understood, my uncles garage has his 67 roadrunner in it, so Im basically beggin 2gnt'ers for help. Either way Id like to have the conversion stuff. I could prolly drop my car off to ya though and come back, or get a hotel room or something, I dunno. I really miss driving my car thats all, mainly cause I've been paying 300 a month car payment and 200 a month insurance and I havent driven it 10 miles in the last 5 months.

MrSlick,

How much for the stock intake piping/airbox? (shipped. zip is 21043)

Originally posted by Malenko

Originally posted by MrSlick That would be a big job... changing the tranny alone is enough work without trying to do the conversion at the same time... It would be better to do the actual job where you live...

yeah understood, my uncles garage has his 67 roadrunner in it, so Im basically beggin 2gnt'ers for help. Either way Id like to have the conversion stuff. I could prolly drop my car off to ya though and come back, or get a hotel room or something, I dunno. I really miss driving my car thats all, mainly cause I've been paying 300 a month car payment and 200 a month insurance and I havent driven it 10 miles in the last 5 months.

I'll have to think about it... that's quite a big job. Usually at the shop here we'd charge at least 300 labor to do that job.

Lee.

Originally posted by MrSlick
I'll have to think about it... that's quite a big job. Usually at the shop here we'd charge at least 300 labor to do that job. Lee.

800 installed is absolutely fine with me. local shop here wants more just to replace the ATX

Originally posted by Malenko

Originally posted by MrSlick I'll have to think about it... that's quite a big job. Usually at the shop here we'd charge at least 300 labor to do that job. Lee.

800 installed is absolutely fine with me. local shop here wants more just to replace the ATX

I'll think about it... not really sure if I have the time to do it any time soon... gonna be real tied up on my weekends due to moving to a new house.

I kinda need it done soon, my cars tags expire VERY SOON, so I need it running in order to take it through inspection. I have no qualms about leaving here on a friday night so Im there bright and early to do the work.

If you get the guys at your shop to do the work or we finish rather speedily, I can help you move.


sounds good doesnt it? :)

where are you located and how much for the short block with pistons rods and all just minus the head?????

Originally posted by MrSlick

Originally posted by Malenko

Originally posted by MrSlick I'll have to think about it... that's quite a big job. Usually at the shop here we'd charge at least 300 labor to do that job. Lee.

800 installed is absolutely fine with me. local shop here wants more just to replace the ATX

I'll think about it... not really sure if I have the time to do it any time soon... gonna be real tied up on my weekends due to moving to a new house.

if malenko doesn't grab the parts from you, I'll take all of the 5 speed conversion parts EXCEPT the tranny itself, it'd be wayyy too much to ship that.

Not sure. Don't need the buttons or any of the hardware, just the bare panel. I have an Avenger driver's side already, and it'd be nice if the dorr panels matched.

What do you want for it?

Originally posted by DarkOne
Not sure. Don't need the buttons or any of the hardware, just the bare panel. I have an Avenger driver's side already, and it'd be nice if the dorr panels matched. What do you want for it?

Hell I don't know man... Dunno what they're worth?

$40?

I pm'd you

Sorry guys,

I'm afraid the car is no longer going to be parted out... out of my hands. Damn insurance companies.

Anyway, I'll be getting hold of some more cars very soon and will post details when available.

Lee.

dangled the dream, then kicked me in the nuts.





find a 5 speed swap to install for me?
i hate my fuckin car right now

i want the engine ... shoot me a pm
Nick
97RS


THX KAPTAIN MYKE FOR HOSTING! www.kaptainmyke.com