Go back to previous topic
Forum name2GNT Buy / Sell / Trade (BST)
Topic subjectFS- 8 Injector setup
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=66291
66291, FS- 8 Injector setup
Posted by XtremeRS, Feb-07-05 11:31 AM
I'm selling my 8 Injector setup as I'm getting the Megasquirt and spark setup. The sale will include the following:

-034 EIC- Programmed pretty rich for 15 psi on the S16G turbo
-Custom aluminum fuel rail with TIG welded AN6 fittings on each end
-Upper intake plenum(NO Throttle body, air temp sensor, or vac T)
-All 4 Accell 30# Fuel Injectors
-Several fuel lines and fittings
-Injector wire harness already wired to the 034 EIC
-MISSING LINK Fuel cut defensor also Included(no map sensor)

All you will need for this setup to work is a 1:1 Fuel Pressure Regulator, and possibly some fuel line/fittings. **IF you have Cruise Control, you will have to cut a small section out of the throttle linkage adaptor bracket for the 90 degree fuel fitting on the end of the fuel rail, but thats about it. You also will want to run a solid front motor mount, as clearance is fairly tight up to the firewall with the fuel rail. Everything is wired, programmed for 15 psi(30# secondaries, and STOCK primary injectors). Like I mentioned, all you need is the FPR, some fuel line/fittings, and the laptop to program the 034 along with the serial cable. I chose to mount my seconary rail differently than others, so here are the pics. It will all come off the car when it gets sold! This setup worked wonderfully for me, but I need full ignition control with the megasquirt..







I'll basically sell the upper intake leaving the rail and injectors still on it, so all you have to do is basically bolt it in place of your upper intake, and swap sensor and throttle body. I do not need your upper intake either, so you can keep/sell that. I liked this fuel rail placement better, since it makes it simple to swap injectors.

Price is 500.00 firm... Paypal or Money Orders only.

**I will NOT SEPARATE ANY COMPONENTS!!!***



66301, RE: FS- 8 Injector setup
Posted by AndrewESi_T, Feb-07-05 01:33 PM
:thumbsup

evul - He doesn't sell in your thread and you don't sell in his :)
66312, RE: FS- 8 Injector setup
Posted by talonguy2005, Feb-07-05 02:44 PM
bump for a good deal
66416, RE: FS- 8 Injector setup
Posted by XtremeRS, Feb-08-05 11:04 AM
bump
66564, RE: FS- 8 Injector setup
Posted by XtremeRS, Feb-10-05 01:22 AM
bump
66773, RE: FS- 8 Injector setup
Posted by SpooledupRacing, Feb-12-05 08:14 AM
bump this to the top.. I have PERSONALLY seen this system up and running I have helped him tune it and I know it is a AWSOME setup.. I hope this goes cause it would be waste to see benched!!!

Dave
66814, RE: FS- 8 Injector setup
Posted by eclipse982nrRST, Feb-12-05 02:51 PM
sell it on ebay man, i bet you could get more than $500.
if i had the money for it, you know i would snake it from ya, but im broke now :(
67005, RE: FS- 8 Injector setup
Posted by micyek, Feb-14-05 07:32 AM
Dang Matt...that's tempting. I'm starting to think that the Megasquirt might be a bit over my head for right now for my power goals...and now I'm considering going back to a possible EIC setup...but on the other hand I've already bought a brand new set of Ford 42 LB. injectors. I'm torn...tell me what I should do :P

free bump for ya at any rate.
67021, RE: FS- 8 Injector setup
Posted by XtremeRS, Feb-14-05 11:26 AM
Originally posted by micyek
Dang Matt...that's tempting. I'm starting to think that the Megasquirt might be a bit over my head for right now for my power goals...and now I'm considering going back to a possible EIC setup...but on the other hand I've already bought a brand new set of Ford 42 LB. injectors. I'm torn...tell me what I should do :P free bump for ya at any rate.


Eh just give me a shout man..42# injectors will work fine for the EIC, just have to cut back some fuel..those prob wouldn't be enough alone for the MS by itself anyway hehe..I can hook ya up on the price too :) I think you still have my Nextel number..