My friend is looking for a complete shortblock...If anyone has anything let me know...Thanks

C'mon guys...no one has anything???

How complete, and where are you located?

I have one that needs about .010" off the crank journals. Any good automotive machine shop can do this.

Originally posted by DarkOne
How complete, and where are you located? I have one that needs about .010" off the crank journals. Any good automotive machine shop can do this.

He said he wants to try and get everything but the head...how much?

i got one for ya. let me know if he still needs it...chris

Originally posted by 2point4
i got one for ya. let me know if he still needs it...chris

Yea, he is still looking for one...send me an e-mail at DSM2GNT95@aol.com with all the details, Thanks

I need to know where you're located. I'd prefer not to ship, so if you happen to be close we could easily work something out.

Originally posted by DarkOne
I need to know where you're located. I'd prefer not to ship, so if you happen to be close we could easily work something out.

I'm located right outside of Memphis, TN...let me know..Thanks

Nope.. i'm in Houston, TX. Unless you want to come pick it up, this won't work out.

Hell, if you pick it up, i'll let it go for $120.

I've got one from a 95 neon that has that emissions thing on the front part of the block. I'm sure those ports can be capped.

Same price Dino listed, plus shipping. I've never shipped one, though, so I dunno who to go through to do it.

Originally posted by cougar694u
I've got one from a 95 neon that has that emissions thing on the front part of the block. I'm sure those ports can be capped. Same price Dino listed, plus shipping. I've never shipped one, though, so I dunno who to go through to do it.

Can you do me a favor and finded out how much it will be shipped to 38058...It should only be around 75-90 bucks..Thanks, Dustin

Originally posted by DSM2GNT95

Originally posted by cougar694u I've got one from a 95 neon that has that emissions thing on the front part of the block. I'm sure those ports can be capped. Same price Dino listed, plus shipping. I've never shipped one, though, so I dunno who to go through to do it.

Can you do me a favor and finded out how much it will be shipped to 38058...It should only be around 75-90 bucks..Thanks, Dustin

I'm looking into shipping right now. I'll let you know what I find out.

**EDIT**

I also wanted to mention, one rod is bent and the pistons are from a SOHC neon motor. It's lower compression than ours or the DOHC model. It should be rebuilt. I'm sure you could find a rod layin around here somewhere. As far as the pistons, :shrug but you could use the neon ones if you wanted.

Originally posted by cougar694u

Originally posted by DSM2GNT95

Originally posted by cougar694u I've got one from a 95 neon that has that emissions thing on the front part of the block. I'm sure those ports can be capped. Same price Dino listed, plus shipping. I've never shipped one, though, so I dunno who to go through to do it.

Can you do me a favor and finded out how much it will be shipped to 38058...It should only be around 75-90 bucks..Thanks, Dustin

I'm looking into shipping right now. I'll let you know what I find out. **EDIT** I also wanted to mention, one rod is bent and the pistons are from a SOHC neon motor. It's lower compression than ours or the DOHC model. It should be rebuilt. I'm sure you could find a rod layin around here somewhere. As far as the pistons, :shrug but you could use the neon ones if you wanted.

He was saying he didn't mind using the neon pistons....he is pretty much just looking for complete motor to just drop in, without having to rebuild or anything like that...I would imagine it needs bearings and rings and all that good stuff right?...just keep me updated...he isn't in a big rush right now..again Thanks

Originally posted by DSM2GNT95
He was saying he didn't mind using the neon pistons....he is pretty much just looking for complete motor to just drop in, without having to rebuild or anything like that...I would imagine it needs bearings and rings and all that good stuff right?...just keep me updated...he isn't in a big rush right now..again Thanks

Yes, you'd need new rings and a hone for sure. The bearings were fine, but I'd changed them anyway. I noticed that one piston sat a little lower than the rest, that's how I noticed the bent rod. You'll want to change the water pump while you've got it out. I'd change the oil pump, too, just in case.

New rings, rods, water pump, and oil pump and you should be good to go. The oil pump's probably fine, but I don't chance those things. I don't know how many miles are on it, so I'd be safe.

So far, the cheapest I found for shipping is about $120, but that's to their docks where you'd have to pick it up. It was more for residential drop off.

Originally posted by cougar694u

Originally posted by DSM2GNT95 He was saying he didn't mind using the neon pistons....he is pretty much just looking for complete motor to just drop in, without having to rebuild or anything like that...I would imagine it needs bearings and rings and all that good stuff right?...just keep me updated...he isn't in a big rush right now..again Thanks

Yes, you'd need new rings and a hone for sure. The bearings were fine, but I'd changed them anyway. I noticed that one piston sat a little lower than the rest, that's how I noticed the bent rod. You'll want to change the water pump while you've got it out. I'd change the oil pump, too, just in case. New rings, rods, water pump, and oil pump and you should be good to go. The oil pump's probably fine, but I don't chance those things. I don't know how many miles are on it, so I'd be safe. So far, the cheapest I found for shipping is about $120, but that's to their docks where you'd have to pick it up. It was more for residential drop off.

He said he will keep that in mind...I will PM you someitme and let you know for sure though..Thank you very much for your help